I first want to say this conversion to the Sportsman has been very easy, and my car idles and runs perfect from the very first start up with Cal. He has answered PMs, calls, Txts and mores code along the way
I have been trying to smooth out my graph with Cals help and it seems to be getting better. Today though, I got a Injector Duty code while trying to get my boost DOWN (3rd gear pulls). I really don't know where to go from here because I have made some changes, most notably with the wastegate arm and Lorenz boost controller. With the WG at 1/8" pressure and the Lorenz completely open, I was going north of 19lbs (not an alky car btw). To get the boost down I had to lengthen the rod to open the puck probably 1/4". This is when I got the code for the first time. I am not sure you have enough info yet so let me know what you think. I did not get a log on this run of course, but can if needed. Car runs fine otherwise. Thanks Brian
Stock block, crank, forged rods and pistons, girdle.
50# injectors, new TT fuel pump, filter, hotwire, 62psi at 19# boost
stock heads, ported, big valves
210/215 cam, 1.6 rockers
t44/31
Precision slic
I have been trying to smooth out my graph with Cals help and it seems to be getting better. Today though, I got a Injector Duty code while trying to get my boost DOWN (3rd gear pulls). I really don't know where to go from here because I have made some changes, most notably with the wastegate arm and Lorenz boost controller. With the WG at 1/8" pressure and the Lorenz completely open, I was going north of 19lbs (not an alky car btw). To get the boost down I had to lengthen the rod to open the puck probably 1/4". This is when I got the code for the first time. I am not sure you have enough info yet so let me know what you think. I did not get a log on this run of course, but can if needed. Car runs fine otherwise. Thanks Brian
Stock block, crank, forged rods and pistons, girdle.
50# injectors, new TT fuel pump, filter, hotwire, 62psi at 19# boost
stock heads, ported, big valves
210/215 cam, 1.6 rockers
t44/31
Precision slic
Last edited: