dank GN
BlackArts Automotive (661)993-8277
- Joined
- Jan 11, 2009
Okay guys I just acquired a set of M&A heads that have been ported and the porting actually looks top notch. It when you look in the runners and see lil holes everywhere that’s alil bit worrying. The heads have been pressure tested and have pasted. My question is there a fix for this? Like maybe some epoxy and fill in the holes and smooth it out ? Or am I worrying to much and should let it ride . Attached is some pictures to show you guys what I’m talking about .
Attachments
-
4A9E3720-3082-4C89-ADE4-B6F13C5E9A38.jpeg1.4 MB · Views: 109
-
CC18FA05-E0A7-40D1-897A-4C666EF3145C.jpeg1.8 MB · Views: 103
-
10ED050B-A5CC-4F43-A26B-954B31BC0FBD.jpeg3.7 MB · Views: 109
-
AB7A2763-2141-41EA-B0B3-E0B8C4FE0818.jpeg2 MB · Views: 103
-
B038A522-C684-419E-94EB-B9B21FB1656E.jpeg1.1 MB · Views: 100
-
5E979D67-4FE1-49BD-A594-B8CEC314A65F.jpeg688.8 KB · Views: 99
-
BAF315E6-D9F3-4833-989D-580A559B82BF.jpeg2.8 MB · Views: 92
-
36397F7E-BC3D-45A1-A884-5B1C5A187B17.jpeg850.4 KB · Views: 89
-
E53F6C00-727E-4894-86A2-2AD4849F991B.jpeg2.7 MB · Views: 88
-
42C5784D-B3D4-41C4-84F7-347DDE006AB3.jpeg3.3 MB · Views: 85