Maf pipe pic

[speedskills]

Just switched over to ls1 maf and hoping someone would post a pic of their maf pipe and the way its set up from turbo to filter. Just got rid of my old Kenne Bell cold air kit. I have the 3" maf pipe with all the hose adapters it just seems like my filter ends up to far away from the quarter panel. Pics would be appreciated. TIA

 

[speedskills]

My old setup.

 

[williamsGN]

Tech and Show April 30 2011 pictures by youlioam - Photobucket

Here are a few.

 

[TurboDave]

Mine with LS1 maf.

 

[TurboDave]

And without a maf...

 

[87gnguy]

Here's a pic of mine with the 3.5 inch LS1 MAF

 

[speedskills]

Here's a pic of mine with the 3.5 inch LS1 MAF

Where did you get the short pipe between the maf and filter? Thanks for the help all.

 

[1KWIKSIX]

MAF Pipe Pics

Here's a couple of pictures of my set up.

A 3 1/2" MAF Pipe, 85mm (Z06) MAF, 4" Tin Man Cold Air Intake Kit.

 

[jlat]

hello: DavPar how about a pic of your setup from the turbo. That's what needed. I got a Tin Man and just got some components to hopefully make a set up from the turbo to the CAI. Maybe this weekend I'll get to play with it.
Also what did you think of the 4" to 3.5" reducer thaty came with the kit?
IBBY

 

[87gnguy]

Where did you get the short pipe between the maf and filter? Thanks for the help all.

Well the intake pipe came from RJC and it come pretty long. I had to cut it off in order for the mass air and the air filter to fit. That piece between the mass air and filter is just part of the intake pipe I had to cut off. It worked nice since my filter is 4"

 

[speedskills]

I knew yall down there in the Redneck Riviera weren't all bad. Did RJC paint it also? I still want to use a 9" filter but with my pipe I'm about 6" from the quarter to the filter. I want to close that gap. Maybe tomorrow I can get a pic up. Thanks.

 

[87gnguy]

Why don't you come down here we will school you northerners on how it's done . The intake pipe is polished and I bought the rest of it how you see it. Since I have a 62mm turbo, the 4" pipe matched up perfectly and I think it works nicely with the 3.5" maf.

 

[87gnguy]

Send me some pics and I'll try to give you some ideas...

 

[speedskills]

Been to PC many times. Even partied there a few times back when I lived in GA. I actually know a couple people that live in PC. I'll post some pics tomorrow. What I really want is about a 4" piece of 3" pipe.

 

[RIFF RAFF]

Mines

Northern .did you try scott?

 

[speedskills]

I think it turned out ok. Ended up mounting the translator down where the old air box was. Just have to get a caspers ats extension to mount the sensor. Thanks guys. Whats going on in PC. Cops beating up tourists? Cant blame them.

 

[williamsGN]

Looks clean, you didn't plug the lines that ran to the charcoal canister did you ?


Ah, I think I see it now hiding under the MAF

 

[speedskills]

I left the canister alone. The maf is just sitting on top.