Racetronix
Well-Known Member
- Joined
- Oct 1, 2001
FPS-G7W416EAN - G7 Stainless Fuel Pump Sender w/Walbro E-85/GAS 430LPH AN Fitting
FEATURES:
(2) A Delphi 30-amp 280-series connector interfaces to factory pump connector. The Racetronix FPWH-006 fuel pump wiring harness MUST be used with this sender in order to properly support the power demands of the Walbro high-performance fuel pump.
(3) The factory return lines are too restrictive and not able to handle the fuel volume of this pump. This will cause the base fuel pressure to rise without allowing it to be turned down. The return line must be upgraded to -6 Teflon-lined hose. Racetronix offers hose barb adapters, fittings and hose if required.
(4) May fit other G-Body cars with or without modification when being adapted to FI applications. NOT SUPPORTED BY RACETRONIX.
FEATURES:
- All stainless-steel construction
- New-style 90 ohm ceramic level sender resistor
- Non-tapered pump outlet tube for maximum flow / performance.
- Tubes have smoother radius bends for maximum flow / performance (1)
- Dual 14-gauge circuits (vs. factory single 16-gauge ) for double current handling (28 amps) and reliability (2)
- Modular wiring harness allows for various wiring configurations / upgrades and simple repairs
- Includes a new stainless-steel locking ring, OE-type tank gasket, coupling hose, SS hose clamps.
- 30-micron graded-media filter sock installed
- Walbro 430LPH E-85 certified high-pressure/volume pump pre-installed
- Custom SS removable pump mount
- Fitted with male -8 AN outlet and -6 AN return fittings (3)
(2) A Delphi 30-amp 280-series connector interfaces to factory pump connector. The Racetronix FPWH-006 fuel pump wiring harness MUST be used with this sender in order to properly support the power demands of the Walbro high-performance fuel pump.
(3) The factory return lines are too restrictive and not able to handle the fuel volume of this pump. This will cause the base fuel pressure to rise without allowing it to be turned down. The return line must be upgraded to -6 Teflon-lined hose. Racetronix offers hose barb adapters, fittings and hose if required.
(4) May fit other G-Body cars with or without modification when being adapted to FI applications. NOT SUPPORTED BY RACETRONIX.