Ended up buying a car with a motor in it already so my new set up will be for sale. I will also have quite a bit more that will be for sale soon once I figure out on exactly how I'll be building this car. Anyhow, for sure at this point in time my spare longblock will be available.
Shortblock is new and was built by JRMotorsports
30 over block
ARP main studs
ARP head studs
Line honed with torque plates
Balanced
Crack checked
Turbo Crank (receipt says polished but I brought a 10/10 or 10/20, crack checked)
Forged TRW Pistons
Molly rings (hand gapped)
Clevite bearings (mains, rods, cam)
Champion Ported Irons (these are the hand ported)
Comp 212/212 roller cam (comp lifters, pushrods, and springs)
Roller cam button
TA HD rocker shafts
FullThrottle timing cover
Double roller chain
Factory Intake with EGR milled out
Oil pan
Factory valve covers
Cork gaskets were used on the oil pan and valve covers
Victor stock style head gaskets
This is basically the bare intake to pan, no headers, turbo, etc. The accessories, turbo, balancer, flexplate, injectors, etc are going into the car I just purchased. I do have the paperwork for the shortblock machine work and assembly. This has zero run time on it. $3800 firm and can help with shipping if need be.
Shortblock is new and was built by JRMotorsports
30 over block
ARP main studs
ARP head studs
Line honed with torque plates
Balanced
Crack checked
Turbo Crank (receipt says polished but I brought a 10/10 or 10/20, crack checked)
Forged TRW Pistons
Molly rings (hand gapped)
Clevite bearings (mains, rods, cam)
Champion Ported Irons (these are the hand ported)
Comp 212/212 roller cam (comp lifters, pushrods, and springs)
Roller cam button
TA HD rocker shafts
FullThrottle timing cover
Double roller chain
Factory Intake with EGR milled out
Oil pan
Factory valve covers
Cork gaskets were used on the oil pan and valve covers
Victor stock style head gaskets
This is basically the bare intake to pan, no headers, turbo, etc. The accessories, turbo, balancer, flexplate, injectors, etc are going into the car I just purchased. I do have the paperwork for the shortblock machine work and assembly. This has zero run time on it. $3800 firm and can help with shipping if need be.