Jan Larsson
Active Member
- Joined
- Nov 22, 2001
On my TTA (so same TB as the 86/87 GN) I noticed the throttle blade don't return to exactly the same location each time I let go of the throttle and seems like the spring (driver side of TB) don't pull it back all the way each time (I can push it back just slightly with my hand to the adjusting screw stop).
Can the spring be turned another turn on there to tighten it up or any other tricks to get it to pull the throttle blade back better each time.
I notice this on my TPS setting (idle setting) as I set it to 0.38 then after pushing the throttle in comes back to 0.40 or 0.42 unless I pull the throttle back manually with my foot or hand then it's back at 0.38 (or if I used the TB leaver and do the same thing). So just letting off the foot wont return the throttle blade 100%.
Can the spring be turned another turn on there to tighten it up or any other tricks to get it to pull the throttle blade back better each time.
I notice this on my TPS setting (idle setting) as I set it to 0.38 then after pushing the throttle in comes back to 0.40 or 0.42 unless I pull the throttle back manually with my foot or hand then it's back at 0.38 (or if I used the TB leaver and do the same thing). So just letting off the foot wont return the throttle blade 100%.