I am trying to get some kinks worked out and am going in the right direction but the maf is throwing me a curve and effecting the fueling. On Direct Scan at wot I am only getting 170 g/sec @ 4650 rpm while accelerating. Now I tried another 87 good maf and there was no difference. I still have the stock down pipe and exhaust with a gutted cat and a K&N cone filter. Next I am going to loosen up the bolts before the cat and see if the readings increase any. Then after that a LS1 and a Translator. I did check all the grounds and the voltages to the maf, all were good
So I am curious if 255 g/sec is realistic with my setup.
So I am curious if 255 g/sec is realistic with my setup.