You can type here any text you want

Recent content by 83MonteSS

Welcome!

By registering with us, you'll be able to discuss, share and private message with other members of our community.

SignUp Now!
  1. 8

    More GN Parts 4-Sale--Engine/Int'r/Acc/Susp'n

    4-Alum. "CenterLine Champ 500-Style" Wheels, stock GN dimensions--$100 ALL are these still available?
  2. 8

    LS front's on b-body spindles?

    I have the LS front brakes on my drop spindles. Im not sure if the b-body dust shield mounts are in the same place as the g body spindles. This is what the adapter bracket mounts to in order to run the LS1 calipers. Im sure you will be able to make them work, if your handy, all it takes is a...
  3. 8

    Hot Wire kit

    Put me second in line if he doesnt it take it.
  4. 8

    Drop spindles and springs, can deliver to BG

    PM sent. Do you accept paypal?
  5. 8

    Best Gta Wheel

    The best way to remove the clearcoat is to use Aircraft stripper. When I re-did my GTAs they were in pretty bad shape so I used aircraft stripper to remove the clearcoat and the paint on the center section. For those stubborn spots I used a fine wirewheel on my cordless drill and it took care of...
  6. 8

    GTA Wheel and Tire Question

    Im running 245/50/16 Goodyear Eagle Hp's all around on my Monte. You shouldnt need any spacer or have any rubbing issues with this size tire. The stock tires on the GNX's were 255/50/16 in the back and 245/50/16 in the front. HTH's.
  7. 8

    Wheel choice opinions.....

    I like the bottom wheel the best.
  8. 8

    Another NA swap

    with the exception of running a few wires wires it is pretty much plug and play. I know that you have to run power to the injectors and run a tan wire to the fuel pump. On my monte, when I do my swap, I plan to run the Gn dash so it will be pretty much plug and play. You say you can do the...
  9. 8

    GTA Wheels - Tire Sizes

    Those tire sizes are pretty much standard for what guys are running on their cars. Im running 245/50/16's all around as I wanted to be able to rotate my tires correctly and im lowered about 1" in front and .5" in the rear. Since your suspension is relatively "new" I think you would be good...
  10. 8

    GTA Wheels and wheel adapters

    Im willing to bet that your car is lowered. Am I correct? If not how much do the wheels sit inside of the fender? You might try a larger spacer if at all possible. What you can do is (if you have slip on spacers) stack them and that should give roughly a 7/16" spacer which is a little over the...
  11. 8

    GN Hybrid needs votes in Car Craft - please : )

    Thats a cool little car. You got my vote. Good luck!
  12. 8

    GTA Wheels and wheel adapters

    For those that run the GTA rears in the front some use a small spacer(3/8"). Im running the LS1 front brakes and that increases my track width by 3/8. I dont need to run a spacer. I have heard that some guys dont run a spacer with stock brakes and they have no issues at all. Im also running a xh...
  13. 8

    Gauging interest, Hydroboost install write up

    Absolutely. This is a conversion that I plan on doing in the short future. I t would be nice to see what Im getting into.
  14. 8

    GTA Wheels and wheel adapters

    Th wheels with the deeper lip are fronts. In your case where you have two fronts and two rears you could run the rears on the front (shallow lip) and the fronts in the rear (deeper lip) with appropriate spacers. This whole subject is very confusing at first but very easy to figure out.
  15. 8

    pics with cars that have draglites???

    Love that stance 86brick. What suspension set up do you have?
See more

Online statistics

Members online
10
Guests online
2,662
Total visitors
2,672
Totals may include hidden visitors.

Latest posts

Newest members

Stay Connected

Back
Top