Recent content by 84conversion
Welcome!
By registering with us, you'll be able to discuss, share and private message with other members of our community.
-
8
Cam sensor
I was wondering if i installed my cam sensor wrong . Will the car run if in 180 degres off? I ask because the car really doesnt have any balls. Does anyone have any ideas? Thanks- 84conversion
- Thread
- Replies: 1
- Forum: Buick Diecast & Collectables
-
8
symptoms of stuck injectors??
Cam censor Im new to the whole turbo buick hobby , but i am certified tech. Im not shure if the car is running right . Is it possible that the cam sensor is 180 off and will it run (poorly)? These cars beat to there own drum and im trying to keep the beat. Its a 84 converted to 87 w/ a...- 84conversion
- Post #18
- Forum: General Turbo Buick Tech
-
8
Spark plug gap
Does anyone know what i should gap my plugs to. Iwas told about .030 . Please let me know if im wrong... Thanks- 84conversion
- Thread
- Replies: 3
- Forum: General Turbo Buick Tech
-
8
symptoms of stuck injectors??
Injector prob Had a similar problem with my car. I used a noid light to check for inj pulse and found no to weak pulse at #5 cylender. I did some snooping around alldata and found a old tsb on dirty contacts at the ecm .the grease they used retains dirt and gives you a poor contact at the...- 84conversion
- Post #14
- Forum: General Turbo Buick Tech
-
8
smc alcohol injection
does anyone know were i can find a wire diagram for a smc alky kit. dont know were the 4 wire go on the controler- 84conversion
- Thread
- Replies: 9
- Forum: Electrical & Wiring
-
8
vacuum booster hell
Plus its a single diaphram booster to small- 84conversion
- Post #7
- Forum: Brakes, Suspensions, Tires & Wheels
-
8
vacuum booster hell
Thanks i just checked the one way valve at the booster and i checked the vac with my snap on vac gauge and its at 20hg. i just noticed that the boosters leaking at a just the right pedal position its enough of a vac drop. I am a 20year veteran tech, but im very new to these great cars... Thank...- 84conversion
- Post #6
- Forum: Brakes, Suspensions, Tires & Wheels
-
8
vacuum booster hell
I recently converted my hot air car to a 87 w/ 212 212 cam. I also converted the brakes to a vacuum power booster. I have a good pedal at idle but the minute i get on it and then try to brake the pedal is hard till i get to idle again. I used a used unit from a elcamino .I think the booster is...- 84conversion
- Thread
- Replies: 8
- Forum: Brakes, Suspensions, Tires & Wheels
