Recent content by bler57

Welcome!

By registering with us, you'll be able to discuss, share and private message with other members of our community.

SignUp Now!
  1. B

    3-2 downshift flare?

    I have a 2004r w/2800 stall, 406 SBC, 11.0 CR, 550HP, 3.73 gears. I have a flare on the 3-2 downshift. All other upshifts and downshifts are great. WHat would be causing this to happen?
  2. B

    Valve Body Identification

    Does anyone have a reference for identifying valve bodies? If I am correct, all of the BR valve bodies have the marking on the side of BR-1,2,3 and a purple brush mark on one side. Is this correct? And what do the Monte SS valve bodies have for identifying marks/numbers? Thanks for the help.
  3. B

    Shifting issues...Weak Bracket???

    I do have the corrector and the cable is set to max at WOT. But I had my wife step on the throttle while I watched and the bracket is flexing quite a bit. I am thinking I need to get a better bracket set-up so there is no movement.
  4. B

    Trans pan spacer to use 700R4 filter

    I've never seen the pan spacer. I am running a deep pan from DRW. They cut the rests inside the pan so you can use the 700 filter. The pan is only 3/4" to 1" lower than stock.
  5. B

    Shifting issues...Weak Bracket???

    I have just installed a new 2004R and cannot get it to shift quite right. The 1-2 shift is at 15(good), 2-3 is at 26-28(good, maybe a bit high), 3-4 is 45-50(a bit high). The 4-3 downshift good, 3-2 good, 4-3-2 good, will not go 2-1. I am wondering if my bracket is too weak and is flexing...
  6. B

    Trans Temps and TCS Converter

    Hello Everybody, Brand new to the forumn and to the 2004r user crowd. I just installed a 2004r and with it a 3000 stall (non-lockup) from TCS. I have driven it only a couple times and noticed that the trans seems to run hotter than I had expected. I am running a trans cooler with a 1000cfm...
Back
Top