Recent content by daredevil95

Welcome!

By registering with us, you'll be able to discuss, share and private message with other members of our community.

SignUp Now!
  1. D

    Fuel Rail Feed Line Fitting?

    Thanks, I found a old thread and it states the same as you. I'm gonna go with AN fitting, this setup will hold me over for now; I found this on Amazon: https://www.amazon.com/gp/product/B0CHP5YF1L/ref=ox_sc_act_title_6?smid=A2Y7J3VVCF64S3&th=1...
  2. D

    Fuel Rail Feed Line Fitting?

    Hi, Anyone know where to find or the type/size fitting on the metal feed fuel line? I highlighted it in red....the metal line that connects to passenger side of the fuel rail. I know where to get the whole line, I'm looking for just the fitting? Thanks in advance.
  3. D

    Loose Crankshaft Pulley

    Hi, do you know the size of the missing pulley bolts? I'm still google researching for size? Ill stop today and pick up new bolts vs digging through my bolt drawers for more time then I would like to spend sifting. lol
  4. D

    Loose Crankshaft Pulley

    It is actually the Pulley itself is loose on the hub that connects to the crank. The bolts inside the hub connecting to the crank are tight. Although I'm missing bolts on pulley so, that may lock it down? IDK? I'm tryting to figure out how that works.
  5. D

    Loose Crankshaft Pulley

    Mannnn....I didn't notice the 3 missing bolts! Yes, they were there prior to engine rebuild., I looked up a pic I had from when I removed engine. Now that I'm looking at it, I'm not sure what those bolts do but, I will install them today. Thanks, The engine has a new harmonic balancer and engine...
  6. D

    Loose Crankshaft Pulley

    Hi, I have a 86 GN, I recently changed my waterpump, removed the intercooler and intercool small fan on crankshaft serpentine belt pulley. As i was reassembling and i went to install the intercooler small fan onto the crankshaft pulley, the fan connects to the serpentine belt pulley and I...
  7. D

    Boost Controller Shenanigans?

    Thanks, I appreciate the info.
  8. D

    Boost Controller Shenanigans?

    Thank you!!! The engineering blue prints are the icing on the cake!! thanks again!! I ordered the boost controller and where did you get that elbow for the passenger side valve cover? Thanks, Gene
  9. D

    Boost Controller Shenanigans?

    Hi, I'm assembling my engine after rebuild and I'm at the turbo. I have a stock turbo boost controller but, when I disassembled the engine, the boost controller was plugged in but, not vac lines were connected? A brass tube in it's place? So, I attached a short video showing the current setup...
  10. D

    One More Connector Needs A Identity?

    Chit.....I did not know that!! Thanks everyone
  11. D

    PCV Help?

    I’m in the process of making CAI but, I finished the PCV, here’s a few pics, basically working forward…new pcv- rubber hose to inlet of catch can - rubber hose on outlet going to check valve - another rubber line going to intake tube. I didn’t have a 3/8 90 free elbow but I did have a straight...
  12. D

    PCV Help?

    Great response, I will run the 1 check valve after catch can. I do have breathers on both valve covers. I hear that should help? I’ll update soon as I’m done today or tomorrow? Thanks, Gene
  13. D

    One More Connector Needs A Identity?

    Yes, but that canister connector is connected and it's red which makes me believe the red connector in question must of went to the old smog pump which is no longer on engine so, i'll tie it off to the side for now. Thanks for the response.
  14. D

    PCV Help?

    I appreciate all the advice, I'm going to try this setup today; stock PCV in intake, hose going to closed/baffled catch can with a metal check valve.....then catch can out line with another check valve going to turbo intake tube connected to brass 90 degree 1/4 fitting. probably only need one...
Back
Top