You can type here any text you want

Recent content by Flippittyflops

Welcome!

By registering with us, you'll be able to discuss, share and private message with other members of our community.

SignUp Now!
  1. F

    Spark pug wire question

    I have a 86 t type with a 4.1 stage 2 motor with stage 2 heads. I was wondering what type of wires you guys with stage motors are running. Out of curiosity have any of you tried denso plugs. I currently run autolite 103 plugs. Thanks for your help and insite Kevin
  2. F

    MAF Translator gen 2 and lt1 MAF

    I'll take $180.00 shipped for everything.
  3. F

    MAF Translator gen 2 and lt1 MAF

    I have a slightly used maf translator gen 2 and a used lt1 maf sensor that I am selling. The translator was bought from a fellow board member. I have decided to go a different route over the winter. I would like $250.00 shipped thanks for looking. If you have any questions just ask
  4. F

    Scantools for sale!!!

    Both items are sold thanks Kevin
  5. F

    Scantools for sale!!!

    I have for sale 1 complete direct scan and 1 used OTC monitor 4000e for sale. The direct scan was purchased from red armstrong about a year ago and never used. The OTC monitor 4000e was in the t-type I traded for. I decided to use a scanmaster insted. I would like to get $100.00 plus...
  6. F

    A few questions?????

    To make a long story short I traded my 86 gn for a stage 2 powered 86 ttype last month. I have just been cleaning and fixing some small things. The car has a carb stage 2 intake converted to fuel inj. I was wondering if I have to do anything special to the intake to have it powder coated...
  7. F

    Code 12

    I just got my gn running today and the service engine soon light is on. I checked the code and its code 12. I was wondering how to clear the code? Thanks Kevin
  8. F

    Blown head gaskets!!

    Thanks for all the info the car was running 23-25 lbs of boost. It seems that I didnt have nearly enough octane. I will finally install the direct scan that I bought in the begining of the year. I just have to find a laptop that will work.
  9. F

    Blown head gaskets!!

    Thanks for the quick info. I'm not sure how reliable alky is?. My local gas station sells 110 leaded. We are running about 1/3 mix 93 and 110. As for injectors and chips are the 60's big on the street? I happen to live 10 minutes from red and jane armstrong so its easy to for me to buy chips.
  10. F

    Blown head gaskets!!

    Well after a summer of fun I finally pushed a head gasket out. So since the motor and trans is coming out. Is there anything else I should do while the car is down for the winter? The setup 1986 buick gn stock block with forged pistons, stock crank and rods, studded heads rods and mains, 009...
  11. F

    Help Needed!!!!!!!!!!!

    Hi my name is Kevin I am in search of a stock turbo. I installed a 3 in over the axle exhaust on my car over the weekend. After doing so I realized that the car smokes a lot. So I pulled the turbo off to fix some leaks and found out that the turbo has a lot of shaft play. I was just...
  12. F

    Fuel pressure problems

    I want to thank everyone for all of your suggestions. Last nite my dad and I pulled off the return line at the fuel rail and it was under a lot of pressure. We came to a conclusion that the return line is plugged so tonite we are going to replace the return line with some braided line. For...
  13. F

    Fuel pressure problems

    Thank you for the suggestion. We have had the tank out 2 or 3 times could you tell me which line is the return line to see if we have plugged it oh the car is a 86. Thank you for all the help Kevin
  14. F

    Fuel pressure problems

    Well that may be it the car sat for a while because of the cold weather. This is the 3rd different regulator on the car i'm getting rather frustrated. I dont want to wash the rings out if this problem continues. Thank you for the suggestion
  15. F

    Fuel pressure problems

    I have a problem with to much fuel pressure. I do not know why but the fuel is shooting out of the vacume port on the regulator and filling the intake up. My car has simple mods: forged pistons, head main and rod studs, 206/206 hydrolic roller cam, turbo tweak chip, TH 3in dp, quad air 009...
Back
Top