Recent content by GBudd

I won't be able to make it. Taking my wife and kids to visit my parents in AZ. I was hoping to make it - but a little vacation is in order for the family.

GBudd - Seal Beach, CA

I will try to make it as long as we aren't visiting family in Arizona.

I also like the GP100 - it takes hot .357 magnum loads without a problem.

I am guessing it is a super imposed image as you see no hood hinges/etc. Still very cool.

When my MAF went pretty much everyone said the rebuilt units are hit and miss - and who knows how long they will last. I just ended up going to the LT1 and translator route. Everything is good again and I don't have to worry about not being able to find a new MAF in the future if needed.

Why not just ask Mr. Anderson?

I just sucked it up and bought a translator and MAF - sometimes I am offroading out in the middle of nowhere and will need to get a good replacement if it ever craps out again. It would suck to be broke down and not be able to get a replacement easily.

Are the A1 Cardones any good for sale online? Mike Barnard was gracious enough to let me borrow his known good MAF to verify the problem - everything is fine. But I need to get this back to him before I leave on my road trip. Any other vendors that reman MAF's that are good quality? Part #...

So where do I find a known good MAF? It seems as though the reman's are at best 50% to be good.

Well it was running great in the driveway - went out for a drive and it threw code 34 again and ran horrible. Idles fine in the driveway but as soon as you give it some gas it stumbles and falls on its' face. Could the used spare of unknown condition be bad as well? Anyway to test it? I...

Took the MAF off and it had a hole in it rubbing on an accessory stud. Had another MAF here and it is running great again. I ground down that stud so it won't be a problem again. I patched the hole in the old MAF with JB weld - but down know if it is fried now or not. Oh well - hopefully...

Hadn't driven the Jeepster for a week or so - and when I parked it everything was fine. Started it up yesterday to take my kids to swim lessons and it wouldn't idle. CEL came on - check the scan master and sure enough code 34 showed up. Can the MAF just go bad from sitting? Will taking it...

That was pretty funny!

Any updates?