You can type here any text you want

Recent content by imac61

Welcome!

By registering with us, you'll be able to discuss, share and private message with other members of our community.

SignUp Now!
  1. I

    still playing with this tranny almost perfect

    whats would a used one cost me?
  2. I

    still playing with this tranny almost perfect

    any remedy
  3. I

    still playing with this tranny almost perfect

    one wierd thing once in a great while ,I only noticed it when the tranny was hot was it seemed when it shifted from 3-4 that it was going back and forth 3-4 3-4 3-4 then as I speed up it just stayed in 4th this even happend when I turned off my lock up switch, I did change the sol.
  4. I

    still playing with this tranny almost perfect

    no the spring on the heavy weight of the govenor I removed?
  5. I

    still playing with this tranny almost perfect

    I left the 1/2 spring off?
  6. I

    still playing with this tranny almost perfect

    put the orig spring on the lighter weight and i cut 4 coils off, shifting good about 4600 1-2 4200 2-3, wish there were an electronic trans controller for mor perfect shifts , one lesson that I did learn about this swap is that I will start with an ss core next time, do you guys think a ss gov...
  7. I

    still playing with this tranny almost perfect

    I dont have a spring on my 1-2 side of the govenor I put it on the heavy weighted side so my small weight has no spring, when the spring was on, it shifted way to early ?
  8. I

    still playing with this tranny almost perfect

    was tweeking my govenor, trying to get my shifts points where i want them, I installed an og 2004r in my 66 skylark 3.90 gears, I put the lighter spring from the the lighter weight and put on the heavier weight that i drilled two small holes in, shifts great 1-2-3-4 but when I go to wot it stays...
  9. I

    og vb with monte ss govenor help!!!!!!

    I have a 2004r tranny in my 66 skylark I would like better wot shifts and later 3-4 shifts my valve body is an og type, I know this isnt the best one for my app. but I learned about this later in the game. specs are hardened stator shaft, super servo, 10 vane pump with good rings, .500 boost...
  10. I

    shifting problem help please!!!!!!

    they were both new , the odd thing , I took the car for a long ride the trany shiffted great about 15 miles but the shifting problem started again on my way home what gives the 3 and 4 shift get dicked up?
  11. I

    shifting problem help please!!!!!!

    ok I installed this 2004r tranny in my 66 skylark , the trany was shifting fine for about 50 miles and today it is acting up, 1-2 shifts are fine but when it shifts from 2-3 it happens whay too soon and 4th comes in right after and lugs the engine I checked my cable and its correct, one funny...
  12. I

    2004r swap

    trans swap just pulled off servo cover and there was no cushing o a spacer that comes with other styles of these servos would you recomend a cushing spring also the orig pin was used why does the other companies besides fairbanks use a new pin? how can I check if length is correct? thaks allot!!!!!
  13. I

    2004r swap

    trans swap not sure if there is a cushing spring borrowed a tool from the tranny guys at work to depress the servo so I can get the inside retainer out I will try this sunday, also what spring would you recomend I think there 3, I am going to drill 3-1/8" holes in the light side of govoner and...
  14. I

    2004r swap

    trans swap I would like it to shift at around 5200 rpm, I am running my stock carter afb 4 v, had my tv set up made by my machinists at work on the cnc and mill, there are just like the ones on the plans that been floating around, also I have the carb tv stud back at 22 percent and at this...
  15. I

    2004r swap

    trans swap just running I spring on the light side of the govenor, what about the cushing spring and some other Ideas I could try, If I lighten up the light side that I left the spring would this raise my wot shifts?
See more

Online statistics

Members online
30
Guests online
8,614
Total visitors
8,644
Totals may include hidden visitors.

Latest posts

Newest members

Stay Connected

Back
Top