Recent content by juicdstang

What are you guys using ? I've heard you can use a valve from grainger's. Is there any benefit to one of the billet valves "like the turbosmart"

What are you guys using ? I've heard you can use a valve from grainger's. Is there any benefit to one of the billet valves "like the turbosmart"

Sorry for misprint mine are 15x8 with 4.5 back spacing not 5.5 If you ever plan on running 10.5 slicks you will need the 4.5 back spacing or it will rub on outer lip. But if you are going to stick with the dr's the 3.5 will work fine..

I need some suggestions on mounting my oil cooler. There isn't really any good locations i can see up front. I do have a fan for it so any locations should work. Any ideas?????

go with the 275/60's i run 15 x 8 with 5.5 back spacing and they do not rubb at all.. i have seen some people that needed to run a 1/8th spacer. If you need to i would recommened squaring up your rear end. Plus the 60's hook twice as good as the 50's i have been 9.10 @ 154 in my mustang with a...

Check this thread out under general turbo buick tech : Has anyone used or heard about the new Intercooler NOS system??? We are all very interesed in this topic. I am doing some testing this weekend with nos's and Nx's and the one i have made i will post results this weekend. I will be using only...

Liqid intercoolers are the best of the best. But, You have to have ice in it to be real affective. I would not recommened one for street driving. A front mount would be more approiate for street use. They are much more efficient than a water to air just running warm water. So i guess its really...

I have a tank also. Drop me a line if you need it.

Does anyone know where i can get one. I have the bosch now but it will not adjust below 52psi. The part number is : 0280160233 "bosch"

As far as testing goes i am doing extensive testing. This weekend i will have some numbers. As far as being crazy for paying 300 plus dollars for a spray bar system it is worth it..... I will tell you why. I had a friend of mine tell me the same thing. After he built his "homemade" distributor...

Will do.... Should have some numbers tomorrow.

Good idea... I'll drop the pan!!!!

Last night i noticed my oil pressure went down to 20 psi... Even when reved up the motor thats all i would get. then out of the blue it went back to 44 psi. I went out and started it up this morning and all i have is 20psi again ????? I switched gauges to see if that was it but i got the same...

What do i need to do to upgrade?

Fatride : I am a nitrous express dealer. The intercooler works awesome. We are doing some R&D with it this weekend on a ford lightning that we put a turbo on. I will let you know the results. I can tell you on my GN with co2 it made a world of differance. I do not have any dyno pulls cause i...