Recent content by mattcsn

  1. mattcsn

    Head gasket

    Sorry for all the questions. This quick tear down keeps snowballing into more. Can I just pull the Pistons and use a stock ring to replace it with? My cylinders look good, no scratching, putting or deformity in them. Any recommendations on rings? Sent from my SM-N960U using Tapatalk
  2. mattcsn

    Head gasket

    I'm out of my element doing rings. Any write up on how to do this? Can I pull the pan and just remove the pistons and get new rings? Sent from my SM-N960U using Tapatalk
  3. mattcsn

    Head gasket

    Any way to check this with the heads already off? Sent from my SM-N960U using Tapatalk
  4. mattcsn

    Head gasket

    What would the symptoms be of a small coolant leak from the intake manifold gasket? Sent from my SM-N960U using Tapatalk
  5. mattcsn

    Head gasket

    Nope I have pvc attached still. Sent from my SM-N960U using Tapatalk
  6. mattcsn

    Head gasket

    Probably around 100k. No coolant in the oil either. Sent from my SM-N960U using Tapatalk
  7. mattcsn

    Head gasket

    It was more white. Link below to video https://photos.app.goo.gl/11vHv2xex2rRbnNr9 Sent from my SM-N960U using Tapatalk
  8. mattcsn

    Head gasket

    Definitely not just condensation. It was consistent and would smoke heavier if driven or warm. I should have done some tests beforehand, but was going to take it apart anyway and just assumed I'd see an obvious blown hg. Sent from my SM-N960U using Tapatalk
  9. mattcsn

    Head gasket

    In hindsight I should have but I just figured it was a hg. Heads are stock and never worked. Sent from my SM-N960U using Tapatalk
  10. mattcsn

    Head gasket

    All are equally clean. Sent from my SM-N960U using Tapatalk
  11. mattcsn

    Head gasket

    Stock. It was coming from both sides. I do have a video. Car has been sitting awhile since video so don't remember all symptoms This was straight from idle. Once warmed up it would our out a lot more https://photos.app.goo.gl/11vHv2xex2rRbnNr9 Sent from my SM-N960U using Tapatalk
  12. mattcsn

    Head gasket

    Wasn't blowing any smoke out of exhaust. Only whitish smoke from breathers. Would smoke right from startup at idle too. Sent from my SM-N960U using Tapatalk
  13. mattcsn

    Head gasket

    I tore the top end off to take a look at the head gaskets as I was having heavy smoke from passanger breather and loosing coolant slowly. I figured what the heck I'll take it apart do some cleaning Upgrade some parts and take a look. Well the head gaskets don't look all that bad. In the past...
  14. mattcsn

    Smoke from breather

    Leak down was what I was going to start with. Sent from my SM-N960U using Tapatalk
  15. mattcsn

    Smoke from breather

    How miserable of a fix is that? I'll be tackling it myself. Sent from my SM-N960U using Tapatalk
Top