You can type here any text you want

Recent content by Mr URL

Welcome!

By registering with us, you'll be able to discuss, share and private message with other members of our community.

SignUp Now!
  1. Mr URL

    Revolution X 9.5" Street-Strip Lock-Up Torque Converter for 200R4 Transmission

    It seems to lay rubber on the street no problem. It's just massively tighter than my old 9/11.
  2. Mr URL

    Revolution X 9.5" Street-Strip Lock-Up Torque Converter for 200R4 Transmission

  3. Mr URL

    Fastest Pump Gas / Alky Cars (updated 10.07.18)

    Give me a second. Trying to hit 60 psi. Might take a minute. HAHA!
  4. Mr URL

    Fastest Pump Gas / Alky 1/8th mile (updated 10.07.18)

    NICE!! Above my page grade!! That's awesome!! :)
  5. Mr URL

    Revolution X 9.5" Street-Strip Lock-Up Torque Converter for 200R4 Transmission

    17 psi of boost. Part throttle. It runs fine WOT. Perfect.
  6. Mr URL

    Revolution X 9.5" Street-Strip Lock-Up Torque Converter for 200R4 Transmission

  7. Mr URL

    Revolution X 9.5" Street-Strip Lock-Up Torque Converter for 200R4 Transmission

    Mike is on here. He can respond.
  8. Mr URL

    Revolution X 9.5" Street-Strip Lock-Up Torque Converter for 200R4 Transmission

    Sure. This is it. It's build to be about a 10.6 car. 9's long term but short term mid 10.s. I couldn't get my 4.1 stroker forget short block done quite yet. I have a bone stock short block in it temporary. Fully ported/polished Precision Turbo heads. It's maxed. The heads have been shaved...
  9. Mr URL

    1986-87 Stock Cam Specifications

    The stock cam is pretty good.
  10. Mr URL

    9:1 compression and pump gas octane

    I shaved my heads to remove the old ring gaskets you can't get anymore and went to single shim gasket from RJC. Compression is about 9:1 give or take. I used to be able to shoot some 91 octane at 10 psi before the alchy came on. Seems like that's not an option now. But with 93 octane I can...
  11. Mr URL

    Fastest Pump Gas / Alky 1/8th mile (updated 10.07.18)

    I ran a 7.1 at 96 with 91 octane and alchy. Street tune. 23/21 degrees timing 24 psi. 1.51 60 ft. My new combo should be about 10.6 quarter and in the 6's.
  12. Mr URL

    ATR Pitbull 2-1/2" stainless steel exhaust

    I used to have one of those on my departed '87 GN. Loved that exhaust.
  13. Mr URL

    Revolution X 9.5" Street-Strip Lock-Up Torque Converter for 200R4 Transmission

    I have a question. I'm starting to tune in some power with my new build and I know Bison has some experience with this so I can learn more. I have and took out a Bruce Trans 9/11 3,700 stall. It's a nice piece. It stalled 3,700 at 0 boost. My problem which might not be the convertor is...
  14. Mr URL

    Front mount intercoolers

    You try a 11.0 bouncing off the rev limiter all the way down the track. And I broke Ken Moser tranny builders trans in 8 pieces doing a 22 lb launch. :) yeah. With a pedal foot skill. No trans brake. I used S10 rear cylinders with big shoes and aluminum drums. :) The rears were setup to hold...
  15. Mr URL

    Front mount intercoolers

    11.00 with a smashed cam and a 9/11 convertor bleeding at high boost hitting the rev limiter. Thanks. Big nuts. My fail was Bruce's 9/11 convertor could not hold the power. My second fail was using used off this website PT&E ported heads that had roller cam springs in it that smashed my...
See more

Online statistics

Members online
9
Guests online
2,546
Total visitors
2,555
Totals may include hidden visitors.

Latest posts

Newest members

Stay Connected

Back
Top