Recent content by odise.carr

Welcome!

By registering with us, you'll be able to discuss, share and private message with other members of our community.

SignUp Now!
  1. O

    IDLE Vacuum issues - Need Assistance

    Hello All, I just wanted to give an update on where I'm at on the build. I've gotten it down to 65-66KPA consistently. I'll layout the method, but would like some feedback. I did this primarily through timing. I amped up timing to 35 degrees, and played with the VE/AFR tables to get it...
  2. O

    IDLE Vacuum issues - Need Assistance

    I did the Leakdown. All cylinders at 2% loss. great seal.
  3. O

    IDLE Vacuum issues - Need Assistance

    No Sir
  4. O

    IDLE Vacuum issues - Need Assistance

    Thank you BEATAV8. that's a good call. There is in fact a diangostic feature. I've verified wiring is correct (coils are sparking on the appropriate cylinders). I'll lock timing and check! MAP sensor is a holley 3.5bar unit, threaded directly into the spacer. I did verify it's appropraitely...
  5. O

    IDLE Vacuum issues - Need Assistance

    Wow, thank you, everyone. CAM comments - I agree the overlap, would make vacuum a little on the higher side. but at it seems 75 kpa just a tad too high. But i'm no expert at Buicks, so i was turning to you all. ChuckLeeper, 4* degrees is where it came out when using the wheel, and lobe...
  6. O

    IDLE Vacuum issues - Need Assistance

    Chuck and PSID6, thank you for your response. CAM SPECS Valve Lift with 1.6 Rockers: .560"/.560" (i'm using 1.55 so i'm at .543") Duration: 297° intake / 306° exhaust Lobe Centerline Method used for installation (believe i had to retard 4 degrees) LSA 113 PCV Valve and Booster/All Vaccum...
  7. O

    IDLE Vacuum issues - Need Assistance

    Hello gurus! I've just finished a build, and am having suspected vacuum issues. I'll list a little about the build below: TA Block, stroker, stock bore size Champion Heads/Intake 230/236 roller Cam (grind from TA) 75/76 PT 160lb Holley injectors E85 fuel, -10 feeds/-8 return Fuel pressure...
  8. O

    M&A Heads, blocks and other parts

    Just a bump. Heads still available, and will include Scorpion Rockers NIB, for an additional $400. I don't have valve covers for these.
  9. O

    6 holley 160# injectora

    i'll take em shipped. unfortunately, i don't have enough posts to DM you privately... but have other successful purcahses and can do PAYPAL.
  10. O

    6 holley 160# injectora

    Whats your ask? I am interested
  11. O

    Hello, I made a for sale post and it seems to have been deleted, almost immediately. I'm just...

    Hello, I made a for sale post and it seems to have been deleted, almost immediately. I'm just checking to see if I broke a rule somewhere? Thanks -odie
  12. O

    M&A Heads, blocks and other parts

    Hello Everyone. The main reason for this post is my M&A heads. See below. I have other things i'm interested in off-loading and want to adhere to forum rules in keeping a singular post. PayPal preferred. Local Pickup on heavy items preferred (but we can talk about crating the heavier...
  13. O

    Wilwood Brakes, AFIS Injectors, Trick Chassis UCAs

    Shipping to 08060?
  14. O

    Wilwood Brakes, AFIS Injectors, Trick Chassis UCAs

    ILl take it
  15. O

    Wilwood Brakes, AFIS Injectors, Trick Chassis UCAs

    Would you consider $650
See more

Online statistics

Members online
3
Guests online
2,915
Total visitors
2,918
Totals may include hidden visitors.

Newest members

Stay Connected

Back
Top