Recent content by scarface_x360

Welcome!

By registering with us, you'll be able to discuss, share and private message with other members of our community.

SignUp Now!
  1. S

    Orange stripe torque converter

    I am looking for an orange stripe torque converter, was told that I could get them from buickclub but i cannot find any contact info for them. I just installed a TE44 turbo and want to get something that will eliminate the little bit of lag that i have now and make it feel more stock from 1-5...
  2. S

    TE44 too much boost

    got it figured out had the vac lines hooked up wrong, thanks ken.
  3. S

    TE44 too much boost

    I just put a new te44 turbo on and i have adjusted the wastegate to the point where it takes little effort to put the rod on. I don't even get to WOT and i hit 25 pounds of boost obviously causing detonation. I did have to adjust the turbo to match the pipes, any tips? How much am i supposed...
  4. S

    TE44 Won't match up

    I just got a TE44 for my car and the outlet to the intercooler sits about 1/2 an inch higher than the intercooler. If i raise the intercooler to the out for the turbo, the fan will hit the shield. Anybody else encounter this problem? how do I solve it? It is a stock intercooler.
  5. S

    No shift under load

    Hey guys. I've got a stock tranny that has been rebuilt with a shift kit installed. It worked fine for the first couple years i had the car. Two years ago the engine was rebuilt and we made a few mods such as a roller rocker cam. From what i have done i should be capable of a low low twelve...
  6. S

    Blow off or Bleeder Valve

    Hey guys, I have an 87 GN, freshly rebuilt engine,, quite a few mods. Running 16-17 pounds on the street with stock turbo. Every time ive been at the track ive seen other gns, not running blow off valves.; I do not have one either. My question is, why don't these guys run bleeder valves? I...
Back
Top