Recent content by slant 6

Just need the corner pc on driver side. Needs to be excellent condition. Prefer the GN grey. Will consider buying the other trim pcs if required to purchase a high quality one. Thanks!

#3. Found at Gbodyparts. 2 looks like a yes.

My shifter can shift in and out of gears without pushing the button. The stock shifter handle was broken, so bought another replacement.... No problem there. But the white plastic rod, attached to the J rod I assume, is retracted. So I took apart the console. I found a broken spring (kind...

Looking for a fair deal on a PTE or equivalent stock mount intercooler. Thanks!

Just read this. Very nice cause. very nicely done. I'm in. Don't have Paypal. Is there another way to send in a donation?

Don't know if this will help or not. I'm not a brake expert, but I had similar issue with not being able to build boost or lock up brakes. Turns out my pads and shoes were kind of glazed over. So I turned both, put new pads on, and had a local brake guy put in his custom soft shoes. That...

Hey Strike, are you sure about that SEM product for the wheel well trim? I bought some and applied to a small area. That stuff is totally flat. My trim is original and it has a semi gloss finish to it. Unless I don't remember it being flat and it's just got wax on it over the years. Any...

Thanks David65. I have the brush in bottle style. Hard to work with. At least for me. I know they have actual paint pens, like you use on model cars. I'll have to stop at the dealer and see if they carry the old paint code in that style. Thanks Strike. I picked up a can. I'll try it on...

Oh! How about paint pens for the body? Do you have a p/n for that too? Thanks for the help!

The same color for all the trim I mentioned? Thanks!

Does anyone know what rattle can manufacturers and paint name or p/n would be close to stock for a GN for the following? Or can you direct me to a thread that already covers this? Wheel well trim Rear tail light housing Window trim front and rear T Top trim. Thanks alot!

What a piece of crap job that was! Removing the entire stinking fender....I had no choice though, because the antenna would not drop down. The RF cable was folded up in a way that I couldn't pull it down. Plus, the cable was too short for me to get in there with a screw driver anyway. I...

Thanks for the help! I'll certainly support our suppliers.

Does anyone know what the GM p/n or where to order the cable for the power antenna mast assembly? 87 GN. After removing my fender.....sucked.....to get to my antenna assy, I find that the replacement one I bought off of ebay is not remotely close to the original one. Figures. Requires...

Chrome bezel with LOCK printed on it. Prefer a working AC Delco unit. thanks.