Recent content by STERN FLOW
Welcome!
By registering with us, you'll be able to discuss, share and private message with other members of our community.
-
S
gn1 alum. heads
103 Race 104 Street 104 Is Hotter. If You Run 10.50 Or Faster You Need A Colder Plug. Like Autolite Ar3932 Witch Is A Racing Plug With A Gasket. Not A Tapered Plug- STERN FLOW
- Post #7
- Forum: Engine Tech
-
S
Car twists
Ck That The Air Pressure Is The Same In Both Rear Tires. Also I Had A Car That Did What You Are Talking About. One Of The Front Tires Had Broken Belting In The Side Wall.- STERN FLOW
- Post #5
- Forum: General Turbo Buick Tech
-
S
Solid Flat Tappet Cam
Solid flat tappet cams work good if you have the right grind for your motor. I also run solid tappets on hyd. cams set lash at .006 Had a Erson 214-214 hyd. with solid tappets In a stock block It ran 9.77 in Nov. of 1999.- STERN FLOW
- Post #2
- Forum: Engine Tech
-
S
high idle with fast
high idle I had the same thing happen to me. I had the butter fly screws come a little lose. Had to center the butter fly and tighten the screws. (use locktight on the screws)- STERN FLOW
- Post #3
- Forum: Performance ECM Upgrades
-
S
Questions on Champion Irons
Champion GN1 14 bolt heads will work on a stock block. You will have to use diffrent rockerarms. If you want to go with the GN1 8 bolt heads later. You can send them back to champion and have them machine for 14 bolt.- STERN FLOW
- Post #5
- Forum: General Turbo Buick Tech
-
S
how do i tell if i have champion iorns ?
Champion iron heads will have Champion CNC on the side below the valve cover & above the exhust ports- STERN FLOW
- Post #2
- Forum: General Turbo Buick Tech
