You can type here any text you want

Recent content by SwedishGN87

Welcome!

By registering with us, you'll be able to discuss, share and private message with other members of our community.

SignUp Now!
  1. S

    Need Help! Vacuum hoses, Coil Pack+Ingnition module, Electrical.

    My bad! Brown wire is actually gray =) And with another probe i got contact! and now i'm missing one of the screws to the TPS, and i would like to know what thread size it has? And even the TPS is set roughly, when i start the engine, the idle is about 2000 rpm, for about 60 second...
  2. S

    Need Help! Vacuum hoses, Coil Pack+Ingnition module, Electrical.

    I have tried to check the TPS, but when i look at the reading it's 0.00 volt. even if i put the probe on engine. it still says 0.00 volt. i start to think the wires are crossed or something like that. in what order are the cables to the TPS supposed to be? i've got brown, blue, black (brown...
  3. S

    Need Help! Vacuum hoses, Coil Pack+Ingnition module, Electrical.

    Adjusting the TPS now, but i can't figure out how to measure it. I have tried measuring between the top and center cable (even between top and bottom cable, and middle and bottom) the one and only value i get is 5.02 volts at idle (without car running) i understand that it should be 0.4 - 0.46...
  4. S

    Need Help! Vacuum hoses, Coil Pack+Ingnition module, Electrical.

    Ipulabbott: No, no screws came with new coilpack, i'll see if i can get hold of some screws that will work for now, until i get hold of the real screws! Yeah, sure we have got some hot girls here, but you guys got some awesome girls too! :D
  5. S

    Need Help! Vacuum hoses, Coil Pack+Ingnition module, Electrical.

    Ah i see! =) yes, he had (have) a house about 5-10 miles from there i live. Ok, but whats holds the coilpack together with ingiton module?
  6. S

    Need Help! Vacuum hoses, Coil Pack+Ingnition module, Electrical.

    i'll try to get hold of a mounting plate, but how should the bolts look like, who holds the coilpack and ignition module? Sorry, don't personally know Nicklas Lidström, but i know where his house is (don't know if he still lives there)
  7. S

    Need Help! Vacuum hoses, Coil Pack+Ingnition module, Electrical.

    Thanks guys!! i'm nearly there now! Things left to do is: mount coilpack with module (is that supposed to mount on a plate? and the plate is mounted to the bracket with one bolt?) i think it's missing. sparkplugs Sparkplug wires. then adjust TPS i believe.....
  8. S

    Need Help! Vacuum hoses, Coil Pack+Ingnition module, Electrical.

    Hello again :) But it seems that i don't have the oil cooler adaptor? and i can't remember removing it either? i'll dig further in the garage tomorrow (suppose that a big garage isn't too good after all) Coilpack fitted, vacuum hoses fitted, electrical is nearly there, it's just oilfilter...
  9. S

    Need Help! Vacuum hoses, Coil Pack+Ingnition module, Electrical.

    hrhoward: Thanks! i'll have to locate the oilcooler adaptor ring then =) copo: Thank you! i might need some pictures of the groundings at the firewall. i found three loose cables. One is black, probably a 16 gage. one is black with white stripe, and one is a ground between firewall and...
  10. S

    Need Help! Vacuum hoses, Coil Pack+Ingnition module, Electrical.

    I now have drawn a "own" vacuum diagram, and there is one connection that isn't connected. Here is my diagram, and will be followed with some pictures too. Vac diagram: ftp://gasa:gasa@gasa.no-ip.com/Chrille/GN87.jpg Picture of the boost gauge sensor...
  11. S

    Need Help! Vacuum hoses, Coil Pack+Ingnition module, Electrical.

    I even had some pictures taken at the right fender, and where the oilfilter is supposed to fit, at the funny looking water sensor and made an explanation about the vacuum diagram..... i'll post this after this post....
  12. S

    Need Help! Vacuum hoses, Coil Pack+Ingnition module, Electrical.

    I now have looked at this, and there is something that ain't right..... =) I will have to make 4 posts to post url's to other sites.... just one left now then =)
  13. S

    Need Help! Vacuum hoses, Coil Pack+Ingnition module, Electrical.

    Thanks! I'll take a look at this as soon as possible! But i think there is more connections than shown in the Vacuum diagram. I'll soon let you know! :D :cool:
  14. S

    Need Help! Vacuum hoses, Coil Pack+Ingnition module, Electrical.

    Hi Everybody! I'm from sweden, and i hope you guys understand what i'm writing, and what i need help with! :) I Need some help to get my GN together again! It broke down 2 years ago, and i needed to rebuild whole engine. And now, when i'm reassembling it in the engine bay, i can't...
See more

Online statistics

Members online
7
Guests online
1,227
Total visitors
1,234
Totals may include hidden visitors.

Newest members

Stay Connected

Back
Top