THensley's latest activity
Welcome!
By registering with us, you'll be able to discuss, share and private message with other members of our community.
-
TTHensley reacted to '87 Turbo "T"'s post in the thread Smoke coming from bolt near exhaust manifold with
Like.
Valve cover leak? Loose causing slight exhaust leak? -
TTHensley replied to the thread boost problem.Ta was out of stock on Friday one is on order.
-
TTHensley replied to the thread boost problem.I had to look it up yes, BUT it stays closed loop tell I get to gate pressure, set at 20 psi. then to duty cycle that is 75%= around 25...
-
TTHensley replied to the thread shaft rockers for iron heads.stock shaft and rockers? for stock head or roller rockers for stock head ? I ask because ever thing in you sig spelled looking for...
-
TTHensley replied to the thread boost problem.The header were TA stock replacement about 12 years old and yes the high temp orange RTV has held up the best. the flanges are good and...
-
TTHensley replied to the thread boost problem.No, second screen shot was the first pass( blue line is boost) 11.1 pass@ 125 first screen shot with blue line up and down was second...
-
TTHensley replied to the thread Who is cleaning injectors these days?.AIS Accurate injector service in Lake Havasu AZ 928-486-4915. did my 60's for 160.00 cleaned and gave me a report. before and after...
-
TTHensley replied to the thread 60 lb injectors discontinued?.I have 60 a 255L pump and a 5857 all is maxed!!! out 10.82 @ 125 down that rabbit hole I went. ^^^^ But if you're staying Orange...
-
TTHensley replied to the thread boost problem.thanks ill be putting some thought into that. I will probably just look at per turbo the two headers and crossover
-
Twww.bing.com/videos/riverview/relatedvideo?q=smoke+machine+automotive+diy This is what I made , but I churched it up with digital...
-
TTHensley replied to the thread boost problem.Smoking the short distance from the turbo flange to exhaust valve is just to much for my little smoke machine. I tried smoking the...
-
TTHensley replied to the thread boost problem.No I have not switched over to external gate yet. as you can see from the two pic. the blue line is not flat,27 high 25 low, but was...
-
TTHensley replied to the thread Engine Cradle.TA performance in AZ has one listed in catalog. Give them a call
-
TTHensley replied to the thread I don't know anything about the car but I hope they are ok..was not a real GNX had Kirby seat brace
-
THaving trouble just all of a sudden. A quick look I don't see an exhaust leak, and I swiped out boost solenoid. Im using a TurboSmart...
-
