Welcome!
By registering with us, you'll be able to discuss, share and private message with other members of our community.
SignUp Now!
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser.
-
T
Only my opinion but I wouldn't run a thicker oil with that cool of an operating temp especially with the fan upgrade.
-
T
Many dont agree with this but i run Vr1 20/50 in NY summer and 10/40 in the fall/winter for 20 years , with only showing a 3 psi hot...
-
T
160, but it goes beyond that since I put in the front mount intercooler. I have to put in some higher rate cooling fans to fix it.
-
T
stay where your at all good
-
T
Same as mine with 10w30 .... 70psi cold -- 18psi hot idle .
-
T
I have a 1986 GN with around 108,000 miles on it. I'm using the factory suggested 10w-30 and have about 70 psi oil pressure when cold...
-
T
TURBO2 replied to the thread
Intake Manifold?.
I already had switched over to studs and torqued to spec. Within a month the upper plenum was leaking again and when I took it apart 2...
-
T
TURBO2 replied to the thread
Intake Manifold?.
It's simple economics. Buying used is a good way to end up with the exact same problem which is something I want to avoid. I could buy...