You can type here any text you want

Recent content by vacuum 6

Welcome!

By registering with us, you'll be able to discuss, share and private message with other members of our community.

SignUp Now!
  1. vacuum 6

    High Torque mini starters

    WAI mini starter 6470N - no problems at all. I dont recall where I purchased back in 2020.
  2. vacuum 6

    New aftermarket MAF not working, likely or not?

    After my Wells coil gave out after just 10 heat cycles, started knocking at cruise and popping at 5 psi, and now my used Delco coil is failing too, random knocking at cruise and breaking up under boost, it’s definitely TR-6 time. Crazy that the Buicks are over 38 years old. Big thanks to...
  3. vacuum 6

    Revolution X 9.5" Street-Strip Lock-Up Torque Converter for 200R4 Transmission

    Makes sense the old school stuff is much looser. It’s all about performance. My butt dyno is off sometimes, take it to the track and see.
  4. vacuum 6

    New aftermarket MAF not working, likely or not?

    TR6 time? 😘
  5. vacuum 6

    New aftermarket MAF not working, likely or not?

    From my experience, it’s a high likely hood of issues. My Wells coil pack and module was shit out of the box.
  6. vacuum 6

    Meziere H2O pump

    Look what I found. :p
  7. vacuum 6

    PCV Elimination Plug

    Good thoughts. Not sure you'll get much vacuum from inlet pipe.
  8. vacuum 6

    PCV Elimination Plug

    I wanted to eliminate oil contamination, intake debris, and the possibility of boost entering the engine. I saw this issue on my motor before removing the original setup. To help the engine breathe better/maintain ring seal, I added a breather to the front cover. Other than the smell while...
  9. vacuum 6

    Revolution X 9.5" Street-Strip Lock-Up Torque Converter for 200R4 Transmission

    I have a 27 year old 12" Neal Chance LU 2800 and tried a 9.5" NL 2800 PTC, saw zero gains other than trap RPMS dropped 300. Turbo Archie, I believe, saw the same thing with an Art Carr to PTC. I would assume you’re not blowing off the tires as easy on the street but probably still spools well...
  10. vacuum 6

    Revolution X 9.5" Street-Strip Lock-Up Torque Converter for 200R4 Transmission

    can you post the build info.
  11. vacuum 6

    PCV Elimination Plug

    I plugged and vented the front cover. Works great.
  12. vacuum 6

    knock during highway cruising then popping under boost

    Yes maybe.
  13. vacuum 6

    vehicle emissions exemption in AZ

    Yup got the copper plate no smog needed!
  14. vacuum 6

    knock during highway cruising then popping under boost

    Wanted to share since this is a PITA for us all. Started getting knock while cruising on the freeway. It got worse when engine temps increased. After a few weeks the engine started popped @ 5# of boost. Check fuel, alky, vacuum lines and added race gas, nope still there...
  15. vacuum 6

    6262 Turbo 300 miles

    Oh noice it has a garrett housing. Bump for that.
See more

Online statistics

Members online
28
Guests online
2,940
Total visitors
2,968
Totals may include hidden visitors.

Latest posts

Newest members

Stay Connected

Back
Top