218/218 roller spec

[FastRegalWE2]

ANyone know the install specs on this, its the COMP grind that actually reads as I recall on the cam card that got lost in the mail, 218/212 but its sold as the 218/218

This info would be greatly appreciated

 

[BlackBandit]

Jeff,

Posted the same question here a while back. Didn't get any replies. If it said 218/212 on the cam card I would assume it's the 218/212 on comp's web site. I listed the specs for that below. Thank you for looking for this man. I really appreciate the effort especially since it was my fault it got lost in the mail. If you don't have the card I wouldn't worry about it anymore. You've already done more than you had to and again, I appreciate it. I'll just mic the cam and if the lift is the same as below I'll assume that's it and if not I'll do some measuring and math. Thanks again man. james



Hyd. Hyd. 1500 to 6200 69-400-8 269HR 269 264 218 212 .511 .504 112º

 

[Evaddave 87gn]

Spec's

Gross Lift Intake .511 Exhuast.504
Duration @
.006 Tappet 269 264
Valve timing Open Close
@ .050 INT 3- BTDC 41 ABDC
EXH 38 BBDC 6- ATDC

These are for cam installed
@ 112.0 INtake Center LINE
INTAKE EXHAUST
DURATION @ .050 218 212
LOBE LIFT .3300 .3250
LOBE SEPARATION 112.0


HOPE THAT IS WHAT YOU NEED!!!:biggrin:

EVADDAVE

 

[49-blues]

so this is not a 218/218 cam?

 

[Evaddave 87gn]

Hummm

Not according to the card.
Evaddave

 

[49-blues]

Doesnt the duration say 218/212? not 218/218 ? im also interested in getting a 218/218 roller cam.

 

[V6RACER]

Call Comp, give them the number off the rear of the cam. They will let you know exactly what the grind is.

 

[8urV8]

Doesnt the duration say 218/212? not 218/218 ? im also interested in getting a 218/218 roller cam.

HERE IS THE CAM CARD FOR 218/218 COMP CAM,I HOPE THIS HELPS!!!

GROSS LIFT INTAKE .469 EXHAUST .469
DURATION @
.006 TAPPET LIFT 268/268
VALVE TIMING OPEN CLOSE
@.006 INT: 28 BTDC 60 ABDC
EXH: 68 BBDC 20 ATDC

THESE SPECS ARE FOR CAN INSTALLED
@106.0 INTAKE CENTER LINE
DURATION @ .050 INTAKE 218 EXH 218
LOBE LIFT .3026 .3026
LOBE SERPERATON 110.0