BlueNoteGp
New Member
- Joined
- Jan 7, 2004
- Messages
- 6
I have this for sale on ClubGp, but due to the fact it is for a turbo car I am getting limited interest, I am going to copy and past what I wrote up there as I am selling it at a very reduced price there and will offer it to you at that same price. As I am not here to try and get more money out of it, in fact I am losing a *&^% of money on this, but I need it gone as I went A2A this year.
Here is the ClubGp write up:
I have switched to an A2A system just due to the fact I am not racing this car anymore. The items I am selling were rarely used, and the pump was never used on the street, just the track.
The Heat Exchanger is an actual Spearco model, it was accidentally bent up when the car was lowered at the track, it happened when I first bought it, so for the last 4 years it has never leaked. Just cosmetic, turn it around and it is straight.
The Pump is almost brand new, still worked perfect today when I pulled it off the car.
The Actual Intercooler has been reworked by a professional shop. It was a Spearco Intercooler, but it only had 2.25 inlet and outlets, I had the shop cut off both side tanks and tig weld on larger tanks, as well as adding 3 inch inlet and outlets.
I have not cleaned them up so yes they are dirty, they once shined So if you want that show quality, just buff them up again.
I only want to sell as a complete set up. I ran 26 psi through this at the track and it does cool very well. I was going to run pipes to the trunk and have a cold can back there with Ice in it to make the air colder then ambiant. Something to think about if you want this for just racing.
I am guessing this all would be around $65 to ship or more. So I am going to just have the price include shipping to the lower 48. $450.00 CDN funds ( Paypal )
This is what I am asking now to just unload it FAST:
I want this gone and really do not feel like ebaying it to some Rice box kid, so one final shot at you guys. Yes you can clean it up and polish it and make it pretty. I am way to busy to even wash the damn thing as you can see. It doesn't leak any coolant, or air. The gauge of the sides I had made up is very thick, forget what gauge but it needed I am sure I can go micrometer it for you.
$300 CDN funds plus shipping. Again if using Paypal you pay the 3% or just make payment as a gift.
Thank you
Here is the ClubGp write up:
I have switched to an A2A system just due to the fact I am not racing this car anymore. The items I am selling were rarely used, and the pump was never used on the street, just the track.
The Heat Exchanger is an actual Spearco model, it was accidentally bent up when the car was lowered at the track, it happened when I first bought it, so for the last 4 years it has never leaked. Just cosmetic, turn it around and it is straight.
The Pump is almost brand new, still worked perfect today when I pulled it off the car.
The Actual Intercooler has been reworked by a professional shop. It was a Spearco Intercooler, but it only had 2.25 inlet and outlets, I had the shop cut off both side tanks and tig weld on larger tanks, as well as adding 3 inch inlet and outlets.
I have not cleaned them up so yes they are dirty, they once shined So if you want that show quality, just buff them up again.
I only want to sell as a complete set up. I ran 26 psi through this at the track and it does cool very well. I was going to run pipes to the trunk and have a cold can back there with Ice in it to make the air colder then ambiant. Something to think about if you want this for just racing.
I am guessing this all would be around $65 to ship or more. So I am going to just have the price include shipping to the lower 48. $450.00 CDN funds ( Paypal )
This is what I am asking now to just unload it FAST:
I want this gone and really do not feel like ebaying it to some Rice box kid, so one final shot at you guys. Yes you can clean it up and polish it and make it pretty. I am way to busy to even wash the damn thing as you can see. It doesn't leak any coolant, or air. The gauge of the sides I had made up is very thick, forget what gauge but it needed I am sure I can go micrometer it for you.
$300 CDN funds plus shipping. Again if using Paypal you pay the 3% or just make payment as a gift.
Thank you
