Anyone ever test and tuned on a dyno?

[gnXfan]

ie, run then adjust, then run again, etc etc etc?

just curious - were you happy? did it = good street performance after?

_BOB

 

[salvageV6]

Yup 3 runs, minor changes in between since they monitor A/F ratio.

24 psi. boost 356hp and 529 ft.lb.s torque.

Don't let Zap see this....

Dyno day last Saturday in CT. T&M Corvette, Manchester.

Backed off to 23psi. on the street with alky.

 

[blackbuick87]

Salvage V6 what was the difference between your first and last runs?

 

[salvageV6]

They were within 14 hp. but the fuel was better delivered at WOT bumping the f.p. up ended up at 11.1.

In the midrange the A/F on spoolup up to 4Krpm was lean at 13.3 and went down to a safer 12.6 or so.

Not sure if it would have been noticed as far as power level but the A/F change means much safer on the street.

Also I learned a wideband O2 is a neat tool to have.

Getting my EGT meter hooked up this weekend should also help.