Anyone know where to get?

[Millenium Falcn]

Anyone know where to get the brass fittings that adapt a
fuel guage to the fuel rail? I'm talking about the miniature
fuel guage. And, what size is it? Thanks.

 

[1badTTA]

mine is an AN fitting, went into the local speed shop (Don's Hotrod) and told them I need a 60psi FP gauge and fitting for a fuel injected car, and they hooked me up. Cost about $20

Think it was -4 AN, not sure

 

[Millenium Falcn]

Thanks, hope my local Autozone or Pepboys carries that.

 

[Kevin Turch]

Yep its -4 AN, i went to an aeroquip dealer and he made me up some. I finally found a -4 AN 180 fitting also, earls sells it, and its the push on type. Works great.

Kevin

 

[bwallace]

Kirban sells them, about 20 bucks. It's a T type of valve, installed it last week works fine for me.

 

[Millenium Falcn]

Thanks.

Thanks guys for pointing me in the right direction.

 

[azgn]

I wouldn't rely on one of those POS little gauges for very long...they tend to get very innaccurate very fast because of the vibration....plus they can leak

better off gettiing a real fuel pressure gauge with a long enough hose to view thru the windshield

for another $20 over the price of the adaptor, you can get a real gauge!