External Oil System

[V6gofast]

We are reintroducing our oil pump cover that I was doing back 10 years ago.
It has the same design style as the Lee unit with some improvments. All the
oil ports are a straight shot to the gears, also the cover is flat so no trying
to align the gears to the register. One of the original units has been on Dave
Bamfords TSM Engine since day one. It can be purchased as the cover only
or a complete assembled ready to install timing cover.

 

[noahzark]

does it fit on stock 109 blocks?...and how much is it?...thanks noah.

 

[TurboCrazy]

Hi Dan, No frame notching, right? How much??

Thanks, Brandon

 

[SNOWBIRD]

Doctor Dan ,,,,how About More Info ,,what Are The Benifits,cost Etc,,do We Have To Use Your Pan Or Can We Modify Ours Help

 

[V6gofast]

Oil System

The unit will fit on any block, all will need minor modifications. There is no
frame notching required. As far as benefits go ther are many. Increasing the
inlet size to the gears, less turns and direction changes,adjustable oil
pressure, remote filter allows for increased oil capicity without adding it in
the pan. As for an oil pan you can modify your stock one but I don't feel
it is adequate in volume and oil control. Pricing starts at 199.95 for the
cover alone to 595.00 for a ready to install race prepped cover.

 

[49-blues]

Dan-how much for just the pump and what minor mods does it need? Do you take paypal? Could a dry sump oil pan be used with this set-up?

 

[marvin's gn]

oil pump

Dan-how much for just the pump and what minor mods does it need? Do you take paypal? Could a dry sump oil pan be used with this set-up?

I would like to know also.

 

[broke1]

For $595,you get whats pictured.I dont think youd want just the oil pump part,you want the whole thing,set up correctly and ready to install on your engine.

Considering the other best option IMO is the TA setup and its $500ish(stock cover,modded,bluprinted and ready to bolt on),the DLS cover is a STEAL.