well, its MOSTLY good news.....but I have to admit, I am a bit of a dumbass.
following mods are now complete
scanmaster installed
billet FPR installed
RJC powerplate installed
MAF pipe and K & N installed
heres the dumbass part. walbro is installed, but I screwed up and will have to go through the entire procedure again
I didnt read like I should have, and therefor didnt use the supplied hose and instead reused the factory pulse regulator. on top of that, my fuel guage no longer works....so evidently, I left a wire unplugged.
today I set my IAC and TPS which went amazingly well.
will be installing R42LTS plugs this afternoon.
left to do......
Springs, Injectors, and Razors kit when it arrives.
following mods are now complete
scanmaster installed
billet FPR installed
RJC powerplate installed
MAF pipe and K & N installed
heres the dumbass part. walbro is installed, but I screwed up and will have to go through the entire procedure again
I didnt read like I should have, and therefor didnt use the supplied hose and instead reused the factory pulse regulator. on top of that, my fuel guage no longer works....so evidently, I left a wire unplugged.
today I set my IAC and TPS which went amazingly well.
will be installing R42LTS plugs this afternoon.
left to do......
Springs, Injectors, and Razors kit when it arrives.