tom robison
ALL UP IN THEM GUTZ
- Joined
- Dec 11, 2004
- Messages
- 1,053
Thought I had this sold but deal fell through, So here it is again.
BA stock stroke (3.400) std/std crank
5.96 K1 rods undersized bushing for press fit piston
3.830 Speed Pro pistons (press pin)
I have about 60 1/4 miles passes on this stuff. About 15 of the passes were 9.60 passes and the rest were low 10's passes. I am asking 1350.00 shipped . All you need is rings, bearings and a block.
pics here rotating Assebly pictures by tomrobison - Photobucket
BA stock stroke (3.400) std/std crank
5.96 K1 rods undersized bushing for press fit piston
3.830 Speed Pro pistons (press pin)
I have about 60 1/4 miles passes on this stuff. About 15 of the passes were 9.60 passes and the rest were low 10's passes. I am asking 1350.00 shipped . All you need is rings, bearings and a block.
pics here rotating Assebly pictures by tomrobison - Photobucket
