Head bolts

[TURBO 6]

I'm putting champion heads and intake on a friends TTA and need a part number for head bolts. Anyone know the part number for ARP bolts??

 

[David Husek]

I talked to Ron at ARP and there is no kit for the TTA, just measure your old bolts and order them.....What I just had to do for my torque plate and I have to do the same for my tta heads when all my extra machine work is finished....

If you are talking about champion GN1 heads, there is a kit available....

with stock block & Champion GN1 Heads #223-3705
with stage 2 block & Champion GN1 Heads #223-3704

Hope this helps

 

[TURBO 6]

Awesome, the old bolts are in the trash. Anybody know what sizes?

 

[David Husek]

I just remembered I won a set of tta bolts from John's performance on Ebay a few days ago, they should be here soon, I can measure them for you....ebay item #260217223604. Get in touch with me in a few days and I will get you the info.....

 

[Jan Larsson]

For stock heads this is what you need to order:

There are no part #'s associated with the head bolts but these are the sizes you need to order.
These are all 7/16 bolts with 14 threads per inch.
4 bolts 4 1/2 inches long
4 bolts 3 1/2 inches long
8 bolts 2 3/8 inches long

Torque to 25fp then 50 then 80. Wait a full day back off and re-torque to 80fp.

 

[TURBO 6]

Thanks Jan.

 

[Jan Larsson]

Remember to get the washers with them as well.

 

[tybob]

thank for the info very appreciate