Hey Razor

[Otto J]

As we discussed before aboiut the bulb i instlled for hte "on" light needing to be an LED. Does this mean it is only a 3 volt power signal?
I have a business that rents from me and does all kinds of LED lighting and a;ll his leds are 3 volt. But i have a super bright white LED that would be perfect for what i am doing.
THanks Otto

 

[Razor]

Otto..
The box puts out 9volts but has a built in resistor on the gray wire to prevent accidental damage to its internals. It should work.. worst case is.. it doesnt.. but wont hurt anything. You can ground the gray wire and no harm comes to the box.

I made the design this way to prevent accidental smoke from coming out .. guess i've done a good job. To this date, not one controller has come back for any reason.

I would before you mount it.. wire it externally Would suck to mount and it not work.

Use the black test button to confirm operation.

HTH

 

[Razor]

Ohh almost forgot.. you think you can dethrone Geno's 10.16 on 92 octane?



hehehehe

I'm gonna burn for this one

 

[Otto J]

Can sure try, What was his MPH?

 

[Razor]

Actually I think it was 10.15 at 136

 

[4sfed4]

Originally posted by Razor
I made the design this way to prevent accidental smoke from coming out .. guess i've done a good job

I thought that all electrical things worked off of smoke?

I say this as it seems they always work fine till you let the smoke out of the box