Interested In Looking At Various Timing Tables

[ZBass28]

I was wondering if some people wouldn't mind sending me files so I can look
at timing tables. Anything from LT1 blower cars would be ideal, but any forced
induction ones will do. I just want to see what other people are doing out there
with timing and compare/contrast to what I have been using and also experimenting with.
Any files can be sent to ZBass28@aol.com

Thanks

 

[bruce]

Map:
20 30 40 50 60 70 75 80 85 90 95 100; Rpm:
68, 68, 68, 68, 68, 57, 51, 46, 40, 40, 34, 34; 400
68, 68, 68, 68, 68, 57, 51, 46, 40, 40, 34, 34; 600
68, 68, 68, 68, 68, 68, 61, 57, 51, 51, 40, 40; 800
57, 57, 71, 71, 71, 68, 61, 57, 51, 51, 40, 40; 1000
57, 57, 74, 74, 74, 68, 63, 61, 57, 54, 51, 51; 1200
57, 57, 77, 77, 77, 74, 68, 60, 57, 57, 54, 54; 1400
57, 57, 80, 80, 80, 74, 68, 63, 60, 57, 54, 54; 1600
57, 57, 80, 80, 80, 74, 68, 63, 63, 60, 57, 54; 1800
57, 57, 74, 74, 74, 68, 68, 68, 63, 63, 60, 57; 2000
57, 57, 74, 74, 74, 68, 68, 68, 68, 63, 63, 63; 2200
57, 57, 74, 74, 74, 68, 68, 68, 68, 68, 63, 63; 2400
57, 57, 74, 74, 74, 71, 68, 68, 68, 68, 63, 63; 2800
57, 57, 71, 71, 71, 71, 68, 68, 68, 68, 63, 63; 3200
57, 57, 71, 71, 71, 71, 68, 68, 63, 63, 63, 63; 3600
57, 57, 57, 57, 68, 68, 68, 68, 63, 63, 57, 57; 4000
57, 57, 57, 57, 68, 68, 68, 68, 63, 63, 57, 57; 4400
57, 57, 57, 57, 68, 68, 68, 68, 63, 63, 57, 57; 4800

Divide by 3 for timing in degrees.
Uses a seperate timing vs boost table for reducing timing some.

 

[Michael McCoy]

$160 shipped for the Syclone ECM Bruce. Email me with your thoughts. Thanks bud.

 

[ZBass28]

Thanks Bruce!!

Anyone else?

 

[ZBass28]

Still looking for anyone that can send timing tables from either a stock or modified LT1. (stickshift and forced induction preferred).

After looking over a couple stock tables I have been able greatly enhance my 'around town' drivability by borrowing
segments from some stock programs. I'd still love to look at a few more variations that people have.

 

[Z-OwNer]

Any chance you could send me your file so I can compare to mine. I'd post my timing table but no telling if its jacked. I just took the stock timing table and reduced it some because our gas is carp here (91 oct) and its a little higher CR 11:1. If you dont mine me looking at it send to purple93z@yahoo.com TIA.

 

[ZBass28]

Sure thing. I'll try and get it on a disk tomorrow and then send it to you.