all prices +shipping, paypal ok add 3%
1. Set of Billstein shocks, maybe 4k miles on them, just need a good cleanup $200 SOLD
http://www.summitracing.com/parts/bsn-24-009492/media/images/make/buick
http://www.summitracing.com/parts/bsn-24-009294/media/images/make/buick
2. Set of eibach 1" lowering springs, installed with bilstein shocks listed above- $100SOLD
http://www.summitracing.com/parts/eib-3803-140
3. Precision PW66 V-band wastegate, new in box, would not fit my downpipe- $425
http://www.precisionturbo.net/boost...-and-Engine-PW66-External-Wastegate--66mm-/25
4. Stock replacement starter, went to a mini, worked good when removed- $50
5. Precision 65mm cast plenum, painted aluminum, never run- $90 SOLD
6. JE pistons, 3.820 maybe 2k miles on them- look fine to me i had to go with .030 cause my block was junk, includes rings and wrist pins- $300 SOLD
https://www.jepistons.com/Products/131556.aspx
https://www.jepistons.com/Products/J100F6-3820-5.aspx
7. Early F-Body complete front disc brake conversion kit- was going to use this with my rack and pinion but the stock setup worked, my loss is your gain, never run only sized up- $300
http://www.ebay.com/itm/1969-GM-Fir...Parts_Accessories&hash=item5651ab56d9&vxp=mtr
8. Precision Q-trim V-band exhaust housing, never run .81 a/r-$150
9. NOS Grand National emblem $85
10. Gbody Parts 3 gauge pod, cannot see rips when gauges are in place, will clean up nice- $50
http://www.gbodyparts.com/product_info.php?products_id=1275&osCsid=336e5ef80a41e0db6c2001b53f4b563f
11. Inline vibration dampner, would not work with my steering shaft- $50
http://www.speedwaymotors.com/Inline-Vibration-Dampener,2036.html
12. TRZ billet aluminum steering arms for use with fbody spindles (package above) new in box- $150
http://trzmotorsports.com/wordpress/?product=billet-aluminum-steering-arms
http://www.summitracing.com/parts/bsn-24-009492/media/images/make/buick
http://www.summitracing.com/parts/bsn-24-009294/media/images/make/buick
http://www.summitracing.com/parts/eib-3803-140
3. Precision PW66 V-band wastegate, new in box, would not fit my downpipe- $425
http://www.precisionturbo.net/boost...-and-Engine-PW66-External-Wastegate--66mm-/25
4. Stock replacement starter, went to a mini, worked good when removed- $50
https://www.jepistons.com/Products/131556.aspx
https://www.jepistons.com/Products/J100F6-3820-5.aspx
7. Early F-Body complete front disc brake conversion kit- was going to use this with my rack and pinion but the stock setup worked, my loss is your gain, never run only sized up- $300
http://www.ebay.com/itm/1969-GM-Fir...Parts_Accessories&hash=item5651ab56d9&vxp=mtr
8. Precision Q-trim V-band exhaust housing, never run .81 a/r-$150
9. NOS Grand National emblem $85
10. Gbody Parts 3 gauge pod, cannot see rips when gauges are in place, will clean up nice- $50
http://www.gbodyparts.com/product_info.php?products_id=1275&osCsid=336e5ef80a41e0db6c2001b53f4b563f
11. Inline vibration dampner, would not work with my steering shaft- $50
http://www.speedwaymotors.com/Inline-Vibration-Dampener,2036.html
12. TRZ billet aluminum steering arms for use with fbody spindles (package above) new in box- $150
http://trzmotorsports.com/wordpress/?product=billet-aluminum-steering-arms
Attachments
-
IMG_3634.jpg1 MB · Views: 114
-
IMG_3636.jpg965.4 KB · Views: 119
-
IMG_3637.jpg1.1 MB · Views: 119
-
IMG_3638.jpg942.8 KB · Views: 122
-
IMG_3639.jpg985.3 KB · Views: 116
-
IMG_3640.jpg853.3 KB · Views: 107
-
IMG_3641.jpg936 KB · Views: 109
-
IMG_3643.jpg1 MB · Views: 116
-
IMG_3644.jpg1.1 MB · Views: 104
-
IMG_3646.jpg967.2 KB · Views: 116