Kenne Bell ported hotair intake manifold

[garrett]

This ported Kenne Bell intake manifold has no defects or problems of any kind. This is not some home ported intake, this intake is from Kenne Bell, a early leader in Buick performance. I de-greased and put a fresh coat of hi-temp engine paint on it. The ports have been opened up a considerable amount from the stock manifold. Egr has been blocked off in both locations. All grommets are in excellent, almost new condition. I fabricated a aluminum 2.5 inch pipe and a mounting bracket at the back of the intake for use with a front mount or 87 stock location intercooler. The pipe is mounted in a very secure manner, but can easily be removed if you desire. It took alot of trial a error to come up with a piece of pipe that would remain seated properly in the intake and still clear the hotair turbo in it's stock location. If the buyer would like advice on how to intercool a hotair regal after the sale, I will help with that. I don't need this part anymore because I went with a 87 intercooled set-up. This would be the next best thing to the expensive 87 conversion, if you want to upgrade your hotair turbo regal. $50 + shipping email at gmdaross@aol.com

 

[Hot Air 85]

Hi..pictures please to playwell@sbcglobal.net I would be interested...play-pal alright??

 

[garrett]

Yes Paypal would be fine. This is a really nice hotair intake. I think you would be very happy with it. I havn't seen a better hotair intake yet, and if I was going to keep a hotair setup or go with a hotair+front mount, then I would not sell it, it would still be on my car.

 

[camaro75racer]

I am VERY interested...please call me at 864-320-9312 or give me a number to call. Just like to ask a couple things before i buy. Dale

 

[6SENSE]

Please send pics

 

[garrett]

The intake has been sold, thanks to all who were interested.