looking for a motor still
- Thread starter wicked t
- Start date
Welcome!
By registering with us, you'll be able to discuss, share and private message with other members of our community.
vacuum 6
Well-Known Member
- Joined
- Jan 6, 2006
- Messages
- 2,401
How much are you looking to spend on a 1987 long block (100K on the motor)? Motor ran 12.25 @ 110.xx @ 25 psi. I might be able to deliver it.
al shapiro
Member
- Joined
- Jan 30, 2003
- Messages
- 139
109 long block
I have a new 109 longblock for sale. Zero miles, still hasn't been picked up from the engine builder. The builder is Jay Wilker who used to be the engine builder for Richard Childress and Dale Earnhart Sr. The motor only had about 3000 miles on it but it was removed for a stage II motor. This was in the Grand Camino (if you know the car). The 109 motor was taken apart and everything was checked and reassembled with new rings, bearings and valve job. The engine has the Ruggles 210/205 cam, club pistons, billit center mains, stock crank and rods. The heads are 8445 with 1.77" int valves and they have been ported to flow better. This motor took the Grand Camino down the quarter in 11.42 sec with a 60 series turbo. Pictures are available upon request. It is located in SW florida (Cape Coral). You can contact me at 239-810-2552 if you are interested. The price is $3500.
I have a new 109 longblock for sale. Zero miles, still hasn't been picked up from the engine builder. The builder is Jay Wilker who used to be the engine builder for Richard Childress and Dale Earnhart Sr. The motor only had about 3000 miles on it but it was removed for a stage II motor. This was in the Grand Camino (if you know the car). The 109 motor was taken apart and everything was checked and reassembled with new rings, bearings and valve job. The engine has the Ruggles 210/205 cam, club pistons, billit center mains, stock crank and rods. The heads are 8445 with 1.77" int valves and they have been ported to flow better. This motor took the Grand Camino down the quarter in 11.42 sec with a 60 series turbo. Pictures are available upon request. It is located in SW florida (Cape Coral). You can contact me at 239-810-2552 if you are interested. The price is $3500.
