You can type here any text you want

New LC-1 & FP logging Install Review

Welcome!

By registering with us, you'll be able to discuss, share and private message with other members of our community.

SignUp Now!

STF420@comcast.

Active Member
Joined
Oct 6, 2003
Messages
152
Hi Guys,

I wanted to post some PL files. Just want to make sure things look OK. Car Felt pretty good.
69K 86 GN All Stock Turbo, Motor, Trans, & Converter. Dutt neck IC. 5.7 TT Alky chip, Razor Alky 6.5 Gain setting, 255/60-15 Street tires.
There is a lot of Wheel spin. I have to ease into the throttle till it hooks on all runs. Temp 65 Degs & clear. Please let me know if anything seems out
of whack.

Thanks, Mike
 

Attachments

Voltage is dropping as low as 12.3 at wot. I had this same problem. Might think about a volt booster. IDC is low (not a bad thing), you must have some big injectors or could be that the alky is at 6.5. I keep mine at 6.
 
Voltage is dropping as low as 12.3 at wot. I had this same problem. Might think about a volt booster. IDC is low (not a bad thing), you must have some big injectors or could be that the alky is at 6.5. I keep mine at 6.

I did see the volts dropping. I may need to Hot wire my Alky pump. The volts drop only when the Alky pump is running.
The Alky pump is fed off 1 of the Ign. Slots in the fuse box. I need to put a volt meter on the battery then the Alternator
while I get on it, To See where I am losing the volts.

Thanks, Mike
 
Back
Top