Oil feed line.

[BlackWrath_86]

Hey all....I've been viewing the boards for quite some time now and I have got a TON of great information off of this board. It's definetely the best place for GN info.
Anywho, I'm installing a Te44 when I finally locate one and I wanted to build the SS braided oil feed line from Jegs/summit fittings.
Can anyone tell me what the thread size/pitch is on the oil pump side of the feed line? I thought it would be 1/8 NPT like the turbo but when I started to thead the fitting in I found out that it isn't! Is it worth locating the right part or just ordering the complete assembly from a vendor? I emailed aggressive auto and Full throttle speed but haven't got a reply yet. Any info is greatly appreciated!
Thanks BW86

 

[salvageV6]

John's Performance carries the plug and play unit with the right bends and ends on it. Braided with metal ends.

Flared pipe fitting into the turbo, either 1/8" or 3/16" forget offhand.

Same as up top where the adapter fitting is.