Hey Guys......I wanna see if you all might have an idea about my idle problem after my upgrades. I have a scan tool on order but as I don't have it yet I have no #'s. So here are my upgrades since I have started. The car was stock before the turbo seal blew......so now it has - TA-33C ,3" Intake with Spectre Filter behind driver headlight, 3" Downpipe w/ no turbo elbow, Custom up pipe, Headers....not sure if they are custom or just bought - This is all the stuff I got from Jamie (Turbo6X2). It now has a 38mm Tial External Gate on the crossover pipe, and no cat and a 3" magnaflow single inlet / outlet where the cat used to be.
The car will crank, come off of the "auto choke" and then idle for about 15 seconds and then it dies. I know that there may not be much to tell me without some numbers but I was just throwing it out there. Is it that the car is running lean due to the increased air flow? Thanks in advance
The car will crank, come off of the "auto choke" and then idle for about 15 seconds and then it dies. I know that there may not be much to tell me without some numbers but I was just throwing it out there. Is it that the car is running lean due to the increased air flow? Thanks in advance
