Question about Z06 maf

[Buix893]

I am getting a Zo6 maf for the buick and found this site and was wondering if this would be ok for the 3 to 5 wire connector? I like how it has the IAT wire to just plug into...

Home » Shop » Connectors, Kits, and Harnesses » All Pigtails and Harnesses » GM Delphi / Packard - LS2 MAF to LS1, LT1, truck MAF adapter harness with IAT

 

[Buix893]

Also Would upgrading to say a 3.5 or 4 inch maf pipe help me at all? I have a 3" on there now, but figured I would go bigger for the 85mm maf...anyone??

 

[Buix893]

anyone???

 

[t-typex1]

Im not sure. I ordered mine from TurboTweak with a ZO6 meter:biggrin:

 

[Pittsburghkid]

I just did this and you have to have that wire adapter you posted the link to because the maf translator won't connect directly to the z06 maf because the z06 maf is a 5pin connector and the stock wire and the translator is a 3pin. The reason the z06 maf has 5pins is because it has the built in iat in the maf. I like it that way because now i don't have to drill a hole into anything to utilize the iat sensor.