Selling off some parts off my last combo
These are all parts that were on the car when it went 9.40s at 3615#s
Set af Modified ATR headers.
These headers are 4 bolt and are modified to flow into a 4 bolt flange not 3 bolt with a 4 bolt plate,
They also move the the turbo slightly forward and down for clearance of a 4 " inlet pipe,They come with a 3.5" downpipe( not sure if it will clear a/c) and is setup for a racegate back into the downpipe( racegate included)
THe flange on the downpipe is a 3.5" tangential flange w/ 0/2 bung welded in
Also come with a stanless steel hanger for the turbo.
1200 shipped
BGC on center intake complete with fuel rails(cut for external regulator)This intake is mint!! its ported all the way thru to match ported GN1 heads(cost an extra 250),Comes with RJC powerplate(cost me an extra 200) also has aluminum water neck.
900 shipped
Precision Turbo GTS 76 with "H" race cover mint condition .96 exhaust housing w/ Tangential flange
1200 shipped
Turbo spools awesome
Set of Champion GN1 race ported 14 bolt heads (not R heads) complete with the big Beehive springs ( used for hydraulic roller)with titanium keepers and steel retainers,
(Heads are going out for fresh valves this week)
Comes with scorpion chevy style roller rocker 1.65 ratio and champion valve covers,These are not the newest casting,But the last set before,Non were repaired,1 was replaced when it cracked.Comes also with arp 14 bolt head studs with nuts and washers and hardened pushrods for hydraulic rollers
1800 shipped will knock off 200 if you take care of new valves
These are all parts that were on the car when it went 9.40s at 3615#s
Set af Modified ATR headers.
These headers are 4 bolt and are modified to flow into a 4 bolt flange not 3 bolt with a 4 bolt plate,
They also move the the turbo slightly forward and down for clearance of a 4 " inlet pipe,They come with a 3.5" downpipe( not sure if it will clear a/c) and is setup for a racegate back into the downpipe( racegate included)
THe flange on the downpipe is a 3.5" tangential flange w/ 0/2 bung welded in
Also come with a stanless steel hanger for the turbo.
1200 shipped
BGC on center intake complete with fuel rails(cut for external regulator)This intake is mint!! its ported all the way thru to match ported GN1 heads(cost an extra 250),Comes with RJC powerplate(cost me an extra 200) also has aluminum water neck.
900 shipped
Precision Turbo GTS 76 with "H" race cover mint condition .96 exhaust housing w/ Tangential flange
1200 shipped
Turbo spools awesome
Set of Champion GN1 race ported 14 bolt heads (not R heads) complete with the big Beehive springs ( used for hydraulic roller)with titanium keepers and steel retainers,
(Heads are going out for fresh valves this week)
Comes with scorpion chevy style roller rocker 1.65 ratio and champion valve covers,These are not the newest casting,But the last set before,Non were repaired,1 was replaced when it cracked.Comes also with arp 14 bolt head studs with nuts and washers and hardened pushrods for hydraulic rollers
1800 shipped will knock off 200 if you take care of new valves
