Race ported Champion heads AND rockers.

[EightSecV6]

Heads are 14 bolt style (will also fit stock block with no mods) and fully ported. Completely fresh and ready to go, set up for a SOLID roller. They have titanium retainers and new springs and are set up for loc wire gaskets.Includes Jesel style 1.65 T&D rockers (individual shafts over $800 new). Heads have been painted black for a "sleeper" look and have gone low 9's on a 274" full weight street car (before freshened). This is a PERFECT pair of heads for a TSM or TSO buildup.No cracks, no junk! $2250 shipped in the cont U.S. for heads and rockers.

 

[EightSecV6]

Heads are 14 bolt style (will also fit stock block with no mods) and fully ported. Completely fresh and ready to go, set up for a SOLID roller. They have titanium retainers and new springs and are set up for loc wire gaskets.Includes Jesel style 1.65 T&D rockers (individual shafts over $800 new). Heads have been painted black for a "sleeper" look and have gone low 9's on a 274" full weight street car (before freshened). This is a PERFECT pair of heads for a TSM or TSO buildup.No cracks, no junk! $2250 shipped in the cont U.S. for heads and rockers.

They ARE NOT set up for loc wires as I posted above, looked at them today. They also have 2.02 intake valves and 1.60 exh. CHEAP!

 

[EightSecV6]

I will set these up for a hydraulic roller for the same price if anyone is interested.

 

[Ed Valvo]

Heads still available? If so, are pics available?

 

[EightSecV6]

heads are still available, no pics right now, they are at the shop.

 

[Ed Valvo]

Original style GN1's or the recent versions? Flow numbers available?

 

[EightSecV6]

Someone has to need these! We can incorporate them into an entire 9 sec stock block TSM or 8 sec stage 2 TSO engine. I can also match them up with a cam for your combo if you are planning on just doing a "top end".I did not get them flowed but I will! As I posted above, I can put either hyd roller or solid roller springs on them!

 

[DR BOOST]

answer your phone bill,

im trying to get hold of you.


surej

 

[EightSecV6]

answer your phone bill,

im trying to get hold of you.


surej

410-282-9335

 

[Ed Valvo]

Are these original style or recent version of the GN1?

 

[GNJoe86]

Surej what R you gunna do with these super race heads in your slow GN. LOL, joking what up bro!
ttt

 

[DR BOOST]

whats up joe!,

im using them in my fishtank...the iron heads i have in there now are starting to rust and the fish are complaining. hopefully the ports are big enough for a fat goldfish to sleep in.

hows your killer coming?

 

[Ed Valvo]

Early or recent style GN1's?