I’m working on my 85 Riviera 3.8 turbo and there’s a round plug on the rear passenger side of the intake manifold, anyone know what this is for? The one on my car and my parts car are both dry rotted, anyone have a good solution for a new one? Thanks!
Rubber plug on back of intake manifold
- Thread starter 6.5 Chevy
- Start date
Welcome!
By registering with us, you'll be able to discuss, share and private message with other members of our community.
Lockman
OH, OK .......Now I get it
- Joined
- Dec 6, 2018
- Messages
- 620
PVC ???
I looked over the engine bay today and the PCV valve is right across from this plug on the drivers side rear of the intake manifold, the hole it sits in is very similar to the other side that’s plugged. Could this be an alternative PCV valve location used on different years or applications?
Attachments
Anthony P
sharing knowledge with those who care to listen
- Joined
- Jan 24, 2007
- Messages
- 1,266
that rubber plug covers the turbo oil drain pipe hole in the intake that the 84-85 turbo regals used.
both the turbo regals and the turbo Riviera's used the same intake manifold. the Riv's turbo and throttle body were pushed rearward and lower than the turbo regal's install location. hemmings has this turbo riv with good pics of engine bay.
https://www.hemmings.com/classifieds/dealer/buick/riviera/2144139.html
it is doubtful you'll find a replacement plug. suggest buying a turbo regal oil return pipe grommet and adding a plug to that.
both the turbo regals and the turbo Riviera's used the same intake manifold. the Riv's turbo and throttle body were pushed rearward and lower than the turbo regal's install location. hemmings has this turbo riv with good pics of engine bay.
https://www.hemmings.com/classifieds/dealer/buick/riviera/2144139.html
it is doubtful you'll find a replacement plug. suggest buying a turbo regal oil return pipe grommet and adding a plug to that.
