You can type here any text you want

sale or trade complete GN setup

Welcome!

By registering with us, you'll be able to discuss, share and private message with other members of our community.

SignUp Now!

motomafia

New Member
Joined
Jul 6, 2005
Messages
45
this is for everything needed to swap almost.... 87 GN motor , j e pistions, new crank and rods. block has about 3,000 miles on it , iron heads ported and polished , new internals, new alternator and water pump . 70mm t/b and hat , power plate , 70-q trinm turbo boosting 25psi, snow performance alky injection, msd ignition, upgraded stock mount intercooler, external wastegate, 3" downpipe , .. 200-r4 tranny all hardened internals , w/ trans brake , 3800 stall... in car boost controller . boost gauge 65 lb injectors , with ecu and chip. ... my car is running low 10s with this .... iam in GA let me know what motor and tranny setups you have for trade looking for small block or big block motors with tranny must be VERY aggresive and turnkey like mine.... or money make offer , ,,thanks! suttonpro@yahoo.com
 
Hey, i have a sbc 406 roller motor...400 punched with Pro-Topline 200cc runner heads (2.02/1.60). Comp Cams solid roller cam&lifters,Harland Sharp roller rockers,Team G intake, 670 street avenger, Fluid balancer,all Eagle internals except pistons which are Keith Black, All engine work done by Dyer Racing Engines. Have a TH350 with brand new 2800 converter never even been bolted to tranny. let me know if interested...this is a very strong motor with less than 100 miles on it...tore the rear end out from under the camaro and noticed some twisting so we junked it and was working on putting it in a mustang. ......
8 flat 1/8 times with street tires and 1200 converter ROLLING out the first 100 ft before gettting on the gas..in a 3800lb car with stock 30yr old suspension, reply here or email me at camaro75_z28@yahoo.com
 
u want a ford or chevy

i have a 306 ford with widsor senior heads ported with 1.6 rockers mild 570 lift cam intake and 750 double pumper matched to a c4 tranny with a 3500 stall converter ran 11.60 in the 1/4 and on a 100 shot of spray it ran10.80 i now have a cheater kit for it but havnet used it yet cuz winter sux so im ready to put 200 and see where it takes it solid lower end if interested let me know and i can round up a pic or two of it thanks
 
Back
Top