scorpion roller rocker setup..

[1985GN]

just in case i cant use the setup i have im also looking for a complete scorpion roller rocker setup for champion aluminum gn1's. i need the mounts and everyhitng for my 14bolt heads.. thanks

 

[BIGWILLYV6]

Roller rocker

I have a set .

 

[hemi8]

I have what you are hunting for, these were on my GN1 14 bolt heads. I have the Scorpion 1.60 rockers, studs, guide plates, Trick Flow push rods and Comp. roller lifters I bought from DLS. I also have the instruction sheet from Champion. Let me know if interested.
Mike

 

[87action]

scorpion rockers

are those stampings on the rockers (L) , (R) to correct the poor geometry of the original 1.6 rockers(crane energizer)?

 

[Eticket]

I'd be interested in the roller lifters and/or anything else that the original poster doesn't want.

I have this setup too, but don't have the guide lifters, pushrods, and guide plates yet.

 

[87action]

roller rockers

Honestly I have the complete set-up, don't need anything but rockers to better my geometry with the stage111 M/A's . I would like to be put in line for rockers only. Don't need guides, pushrods, studs or lifters. Paypal ready

 

[pacecarta]

have to check the ratio , i have scorpions ( silver color) with studs/ guides for the gn1s 14bolt , might even have pushrods but recall missing one

edit they're 1.65 and i only found 11 pushrods (comp cam)

 

[hemi8]

ETICKET, sent email. 87 action I might be in touch after I see if one of the first 3 interested people are going to purchase.
Mike