ACME RACING
( Adult Swim )
- Joined
- May 29, 2001
- Messages
- 1,297
Too much power is not enough ......I like the smell of burning tires at 90 mph.....
http://www.eden.rutgers.edu/~adrialk/Gixxer/GIXXERKART.wmv
=========
Uncle Freds S600 Mercedes (RennTech modified) is running good ...not bad for weighing 4610 lbs.... Supra has 543 Hp....but weighs 1000lbs less....
http://www.treynor.com/BenzVsSupra.wmv
Mercedes engine stock:
Intercooled twin-turbocharged 5,513-cc SOHC 36-valve 60° V-12. Two-piece high-pressure die-cast alloy cylinder block. Alloy heads and pistons. Die-cast magnesium cylinder head covers.
Net power 493 hp @ 5,000 rpm
Net torque 590 lb-ft @ 1,800 - 3,500 rpm
Compression ratio 9.0:1
Fuel requirement Premium unleaded, 91 pump octane.
=========
Acme needs some for the injection system for Reynolds race coming up
http://www.kimmershow.com/SupportFiles/Scripts/FileTamer.asp?FileID=651
=========
Special bonus pictures ..... Warning : Biker Chicks dressed up nicely ..
http://www.kimmershow.com/SupportFiles/Scripts/FileTamer.asp?FileID=656
=========
Alan

http://www.eden.rutgers.edu/~adrialk/Gixxer/GIXXERKART.wmv
=========
Uncle Freds S600 Mercedes (RennTech modified) is running good ...not bad for weighing 4610 lbs.... Supra has 543 Hp....but weighs 1000lbs less....
http://www.treynor.com/BenzVsSupra.wmv
Mercedes engine stock:
Intercooled twin-turbocharged 5,513-cc SOHC 36-valve 60° V-12. Two-piece high-pressure die-cast alloy cylinder block. Alloy heads and pistons. Die-cast magnesium cylinder head covers.
Net power 493 hp @ 5,000 rpm
Net torque 590 lb-ft @ 1,800 - 3,500 rpm
Compression ratio 9.0:1
Fuel requirement Premium unleaded, 91 pump octane.
=========
Acme needs some for the injection system for Reynolds race coming up

http://www.kimmershow.com/SupportFiles/Scripts/FileTamer.asp?FileID=651
=========
Special bonus pictures ..... Warning : Biker Chicks dressed up nicely ..
http://www.kimmershow.com/SupportFiles/Scripts/FileTamer.asp?FileID=656
=========
