TA Low Profile Valve Covers

[CTX-SLPR]

Anyone running these yet and have a picture in engine bay? I'm very curious about them since I might have clearance issues with my hybrid and definately need different valve covers since all I got right now is a crappy set of NA ones and they won't clear the roller rockers.

Thanks,

 

[pitch black]

Are you running t/a heads? They were made to run on t/a heads only, as they have a higher valve cover deck hight.

 

[CTX-SLPR]

Are you running t/a heads? They were made to run on t/a heads only, as they have a higher valve cover deck hight.

Specifically Designed to clear roller rockers and stock
rockers on all cylinder heads while also providing plenty
of clearance to the A/C box!

I thought they were for all heads using the 4-bolt valve covers?

 

[GNVYUS 1]

I have a pair of aluminum covers for sale in the parts room. There are pics of them on a GN with TA heads and the owner also posted his rocker ratio.

 

[CTX-SLPR]

I have a pair of aluminum covers for sale in the parts room. There are pics of them on a GN with TA heads and the owner also posted his rocker ratio.

Um .... this doesn't seem very helpful when I asked about TA's low profile valve covers, not valve covers for TA heads, thanks for playing though.

 

[Googs]

I don't have pics, but I have seen them on a T-Type. He didn't have any of the A/C components, but I did get the idea of how they would look and function. They give you a couple of inches clearence around the A/C components on the pass fire wall, instead of the 1/2" or less that standard tall covers do. When TA finally starts machining there castings, I'm ordering a set for my GN. I talked to Mike and he assurred me that they would clear my .630" lift cam w/ 1.55 TD rollers. I hope this helps some.