So when I sent the tranny out I left the L shaped lines in tranny that attach to the other lines going towards the motor. Well these lines went MIA and I have no idea where to get those little L lines that go into the tranny. Any suggestions other than the junkyard? Is it possible to just replace the whole fixed metal lines with some steel braided ones?
Tranny lines
- Thread starter prokeep15
- Start date
Welcome!
By registering with us, you'll be able to discuss, share and private message with other members of our community.
This may be better posted in the tranny section.
I have thought of doing like a push-lok type hose on mine.. but havent gotten to it. I know the fittings on the tranny are either 1/4 NPT or 3/8 NPT female. Then you would get an adapter for example 1/4 npt to a -6 male. Then run -6 hose to the cooler.
I have thought of doing like a push-lok type hose on mine.. but havent gotten to it. I know the fittings on the tranny are either 1/4 NPT or 3/8 NPT female. Then you would get an adapter for example 1/4 npt to a -6 male. Then run -6 hose to the cooler.
